I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NovaSensor NPC-1210 Series low-to-medium pressure sensor
The NovaSensor NPC-1210 Series is a low-to-medium pressure sensor offering accurate analog output, temperature compensation, and compact PCB-mount design for air and gas sensing.
The NovaSensor NPC-1210 Series is a family of high-performance, low-to-medium pressure sensors designed for accurate pressure measurement in air and non-corrosive gases. These sensors feature a piezoresistive sensing element combined with temperature compensation and signal conditioning circuitry, ensuring precise and stable output over a wide temperature range.
Built for industrial, medical, and instrumentation applications, the NPC-1210 Series provides analog voltage output that is linearly proportional to applied pressure, simplifying interface with microcontrollers, ADCs, and control systems.
Encased in a compact, rugged package, the sensor is optimized for PCB mounting and delivers reliable performance for pressure ranges from 0 to 15 psi up to 0 to 100 psi (depending on model).
Key Features:
-
Pressure Range: 0–15 psi to 0–100 psi (varies by model)
-
Output Type: Analog voltage (ratiometric)
-
Supply Voltage: 5 VDC (typical)
-
Accuracy: ±1% full scale (typical)
-
Temperature Compensation: 0°C to +85°C
-
Media Compatibility: Air and non-corrosive gases
-
Low power consumption and stable long-term performance
-
Compact, PCB-mountable package
-
RoHS compliant and lead-free

Related products
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Â Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
Superbit expansion board for BBC Micro Bit Pocket Sized – Single Board Computer
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
ULink2 ARM Emulator Programmer firmware Support MDK5.0 Cortex-M4 SWD
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified

Reviews
There are no reviews yet.