I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
STM32F411CEU6 minimum system development board
The STM32F411CEU6 Minimum System Board is a compact ARM Cortex-M4 development board ideal for high-speed embedded and IoT applications.
Description
The STM32F411CEU6 Minimum System Development Board is a compact and powerful ARM-based platform designed for high-performance embedded system development. It is built around the STM32F411CEU6 microcontroller, featuring a 32-bit ARM Cortex-M4 core with FPU, operating at speeds up to 100 MHz.
This minimum system board includes essential components such as a high-speed crystal oscillator, reset circuit, power regulation, BOOT configuration, and SWD programming/debug interface. All GPIO pins are broken out and clearly labeled, allowing easy interfacing with sensors, displays, motors, communication modules, and other peripherals.
The board supports popular development environments including STM32CubeIDE, Keil, and IAR, and can be programmed using ST-LINK debuggers. Its small size and high performance make it ideal for IoT devices, robotics, motor control, signal processing, wearable electronics, and advanced academic projects.
Reviews (0)
Shipping & Delivery
Related products
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Â Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.