I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
TB6612FNG Ultra Mini Motor Driver Module
TB6612FNG Ultra Mini Motor Driver is a compact dual H-bridge module for controlling two DC motors or one stepper motor. Efficient, low-heat, and ideal for Arduino, ESP32, and robotics projects.
Description
TB6612FNG Ultra Mini Motor Driver Module
The TB6612FNG Ultra Mini Motor Driver is a compact and efficient dual H-bridge motor driver ideal for robotics, DIY electronics, and embedded projects. Designed to control two DC motors or one stepper motor, this module offers higher efficiency and lower heat generation compared to traditional L298N drivers.
Powered by the reliable Toshiba TB6612FNG IC, it supports PWM speed control and directional control, making it perfect for Arduino, Raspberry Pi, ESP32, and other microcontroller-based projects where size and performance matter.
Key Features
-
Dual H-Bridge motor driver
-
Drives 2 DC motors or 1 stepper motor
-
Motor voltage range: 4.5V – 13.5V
-
Output current: 1.2A continuous (3.2A peak per channel)
-
Supports PWM speed control
-
Low power loss & high efficiency
-
Built-in thermal shutdown & overcurrent protection
-
Ultra-mini size – ideal for compact designs
Applications
-
Robotics and robotic cars
-
Line follower and obstacle-avoiding robots
-
DIY electronics projects
-
Smart vehicles and automation systems
-
Educational and engineering projects
Reviews (0)
Shipping & Delivery
Related products
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.