I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-6%
12V 40W CR-10 ender 3 Extruder Assembled MK8 Hot End Kit for CR10 CR-10S S4 S5 Ender-3 Ender-3S Aluminum Heated Block parts 0.4m
Original price was: ₹220.00.₹175.00Current price is: ₹175.00. inc. GST
6 Inch 350w 36v Brushless E-bike Wheels Scooter Hub Motor
Original price was: ₹5,000.00.₹4,500.00Current price is: ₹4,500.00. inc. GST
CR-10 MK8 Drive Feed 3D Printer Extruder for Ender 3 CR-10 CR-10S CR-10 S4
Original price was: ₹850.00.₹800.00Current price is: ₹800.00. inc. GST
- This extruder set is great for Creality 3D Ender 3 ender 3 pro-CR-10.
- Filament Materials: PLA/ABS/Wood/TPU/PTEG,
- Made of high quality metal material.
- Easy and convenient to use.
- With high quality and durable performance.
- Main material: MetalMounting screws.
- Aluminium MK8 extruder frame, with bored intake hole.
- Spring. Brass extruder drive gear.
- Special Bowden tube fitting (great improvement over stock).
- For all 1.75 mm filament.
- Right hand extruder kit
- MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Description
This CR-10 MK8 Drive Feed 3D Printer designed as the upgraded Aluminium replacement, Upgraded 3D Printer Extruder Block, with Full metal aluminum alloy. These  MK8 Drive Feed 3D Printer Extruder specifically for CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus replaces the acrylic parts of creality 3D printers. This MK8 extruder is quite simple to install, all you need to do is simply unbolt the old original plastic extruder and screw in the new “Metal Extruder”. Thus it is ready to print. These MK8 extruders are perfect for a 1.75mm filament 3D printer MK8 Bowden extruder frame.
The use of High-quality metal aluminum alloy features stability and durability. And performs better than the original plastic version. Thereby allows printing flexibles and regular plastic filaments. This MK8 extruder hot end comes with all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder. Moreover, this extruder driver offers better stronger pressure pushing the filament into the printer nozzle. Thereby improves the printers’ performance. The adjustable bolt-on the extruder kit allows you to adjust the pressure of the extruder gear as needed. This metal extruder kit uses a 1.75mm filament of 3D printer MK8 Bowden extruder frame. This extruder design provides complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. A 40 Teeth drive gear moves the 1.75mm filament very smoothly.
Reviews (0)
Shipping & Delivery
Related products
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size
- Moulding Technology: FDM.
- Print Dimensions: 220*220*300mm.
- Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
- Print Accuracy: + - 0.1mm.
- Layers Thickness: 0.1-0.4mm.
- Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
- Nozzle Quantity: 1.
- Nozzle Temperature: <260 Degree C
- Hot Bed Temperature: <135 Degree C
- Working Modes: Online or TF Cards are printed offline.
- File Formats: STL, ODJ, AMF.
- Slicing Software: Cura, Repeti-Host, Simlify 3d.
- Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
- Machine Power: 270W.
- Printing Materials: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient, etc.
- Consumables Diameter: 1.75mm.
- Heating upto 100 deg C in 5 mins,
- Printing with High precision,
- Resume Printing after power-off,
- Soft Magnetic Stickers - Instead of traditional beauty paper & glue, easy to mold, model adhesion is good.
- Built-in Power Supply - 350w high-quality power supply, easy to achieve long time stable printing.
- Dual Y-Axis - synchronization, small moving quality, flexible & reliable.
- Down Shift Z-Axis - for smoother movement.
- Descartes Design - Down Shift Z-axis for smoother movement.
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Ramps 1.6 For 3D Printer Parts
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
TEVO Tarantula I3 Aluminium Extrusion 3D Printer kit
- Layer resolution of 50 microns.
- MAX Printing Speed: 150 mm/s.
- Build size: 200X 200 X 200mm.
- Full Metal Bowden Extruder.
- Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
- Material specifications 1.75mm in diameter.
- Positioning accuracy: Z 0.04mm, XY 0.012mm.
- Printing Color: Single color.
- Nozzle diameter: 0.4mm.
- Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
- Heating plate temperature: 60-120°C (proper winter warming and summer appropriate cooling).
- Best ambient temperature: +/-25°C.
- Power requirements: 220V, 250W, 50Hz, 0.89A.
- Connection: TF card or USB.
- The file print format: STL, G-Code.
- Compatibility: Windows, Linux, Mac.
- CE, FCC specifications: CE, FC, ROHS.
- No Printed Parts.
- Easy Assembling.
- High Performance.
- 2020 and 2040 Aluminium Frames.
- Equipment size: 430 X 440 X400mm.
- Package size: 440X 340X 190m.
- Device weight: 7.5kg.
Reviews
There are no reviews yet.