I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%Sold out
Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal - Type 2
Original price was: ₹1,500.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
250W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit - Basic
Original price was: ₹13,500.00.₹12,000.00Current price is: ₹12,000.00. inc. GST
TDA7498 High Power Digital Amplifier Board 2*100W DC 14-34V Audio Stereo Amplifier Board
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
- High power class d digital amplifier.
- Two-channel stereo, 2x100w power output.
- Material: Metal
- 100 W + 100 W output power at THD = 10% with RL = 6 Ω and VCC = 36 V
- Wide-range single-supply operation (14 – 39 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
- Applicable speaker impedance: 4/6/8 ohm(8 ohm is the best).
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- size: 110*70*10mm
Out of stock
Description
TDA7498 High Power Dual Channel Stereo Audio Amplifier is a 14-36 power supply On-board TDA7498 stereo audio amplifier chip. TDA7498 digital amplifier board module based on dual BTL class-D audio amplifier with a single power supply module designed specifically for home systems and active speaker applications. It is a linear circuit with a dual-channel, capable of 100w+0W power output, and generates a peak output current of 8A. Thus Dual Channel Stereo Audio Amplifier board module offers very low harmonic distortion and better sound quality. And it can drive 4/6/8 ohm speakers.
It supports Wide-range single-supply operation of 14V – 30 V providing an efficiency of 90%. TDA7498 digital amplifier board module has 5 control buttons. These control buttons are used to change the track or control the volume. Meanwhile, the DIP 2 switches button functions as combining the up/down position of each switch you can obtain 4 different filters for the output. TDA7498 High output power digital amplifier features reverse polarity protection. When the heat sink temperature rises to a certain value, the cooling fan will work. It comes in a 36-pin Power SSO package with an exposed pad up (EPU) to facilitate mounting a separate heatsink.
This amplifier allows the selection of four fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB settings via DIP switch selection. The Parallel BTL function in the amplifier performed using the MODE pin. It also has a power indicator to identify the power state of the module. Moreover, it features a thermal overload protection system and features both system shutdown and mute control function.
Reviews (0)
Shipping & Delivery
Related products
LM1875 20W Audio Power Amplifier IC
- 20W Audio Power Amplifier
- AVOÂ typically 90 dB
- Low distortion: 0.015%, 1 kHz, 20 W
- Wide power bandwidth: 70 kHz
- Protection for AC and DC short circuits to ground
- Thermal protection with parole circuit
- High current capability: 4A
- Wide supply range 16V-60V
- Internal output protection diodes
- 94 dB ripple rejection
- Plastic power package TO-220
POWER SUPPLY TDA2030 Audio Amplifier
- Operating voltage: 6V-12V
- Output peak current: 3A
- Onboard TDA2030A Audio amplifier Board
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- Onboard 10 k adjustable resistance, can adjust the volume of the amplification
- Onboard power indicator light
- Low harmonic distortion
- Chip has lead to the main pin, can directly input audio signal
- Short circuit& thermal shutdown protection
- Dimension:32*24mm
- Weight:10gm
STA 540 Audio Amplifier
- High output power capability
- Minimum external components count:
- Standby function (CMOS compatible)
- No audible pop during standby operations
- Diagnostic facilities:
- Protection
TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
- Amplifier chip: TDA7498E
- Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
- Output power: 2 x 160W
- Number of channels: Two-channel Stereo
- Efficiency: 85%
- Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
- 160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
- 1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
- Wide-range single-supply operation (14 - 36 V)
- High efficiency (η = 85%)
- Parallel BTL function using the MODE pin
- Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Smart protection
- Thermal overload protection
- Small offset less than 20 mV
- PCB board size: 108 x 78mm
- Weight: 172g(approx.)
Reviews
There are no reviews yet.