PIC16F676 Microcontroller IC
- 128 bytes of EEPROM Data Memory
- Programmable pull-up resistors
- Individually select able analog channels
- ICD2 programming support or debugging support with optional header adapter
- 8 oscillator sellections including precision 4 MHz RC oscillator with programmable calibration and Power-on Reset
- Program Memory Type:Flash
- Program Memory (KB):1.75
- CPU Speed (MIPS):5
- RAM Bytes:64
- Data EEPROM (bytes):128
- Digital Communication Peripherals:1-UART,
- Timers:1 x 8-bit, 1 x 16-bit
- ADC:8 ch, 10-bit
- Comparators:1
- Temperature Range (C):-40 to 125
- Operating Voltage Range (V):2 to 5.5
- Pin Count:14
- Cap Touch Channels:8
Insulation Cotton Washer for TEC1- 12706 Thermoelectric Cooler Peltier
Wire Stripper Flat Nose Cable Cutter with Practical Punch Down Tool
- Color: Yellow
- Material: ABS Stainless Steel
- Length: 92 mm
- Weight: 10 gm.
- It works great and strips smoothly and cleanly.
- This wire stripper is small and exquisite, which is very convenient and practical.
- It works great and strips smoothly and cleanly.
- This wire stripper is small and exquisite, which is very convenient and practical.
- Easy to operation, so you don`t worry that the blade would nick the inside wires.
- It cuts cables with different thickness and cuts very clean and takes only a few seconds.
USB 2.0 Type A Male to USB A Male Cable
- USB 2.0
- Length:1m
- A-A male cable type
- Blue colored cable
- Standard USB 2.0 cable assembly, Type A male to type A male
- signaling rate: 480 Mbit/s (60 MB/s) Connector Type: USB 2.0 Type A Male to Type A Male
- High quality USB 2.0 high speed cable. Usually used for some external drive enclosures or cameras.
- Fully Compatible with USB 1.0,1.1 , Supports data transfer rate at up to 480Mbps
- Supports plug play connections for devices such as external hard drives, modems, printers, scanners, VOIP devices other USB peripherals.
- It is plug & play and hot swappable (no need to turn off your PC to plug a device in or out).
A-Male to A-Female USB 2.0 Extension Cable (150cm)
- Hi-Speed 480 mbps With 3g Dongle Support.
- Easy to operate, bring you great convenience.
- Made of high-quality Material
- USB 2.0 A Male to A Female Extension Cable.
- A-male to A-female USB cables are typically used to extend the reach of your existing USB A/B cable, or to use USB device such as memory stick on your desk instead of inserting it to the back of PC
- Left connector type: USB 2.0.
- Left connector gender: Male.
- Right connector type: USB 2.0.
- Right connector gender: Female
Serial RS-232 9 Pin Cable Male to Male
- Connector Type: DB9 Male to DB9 Male.
- Cable diameter: 6mm
- Cable length:1.5m
- Fully shielded to prevent unwanted EMI/RFI interference.
- Fully molded connectors with thumbscrews provide quick and easy connection.
- All lines wired straight through.
- Used for extending a 9 pin serial male to male cable, or connect it to an old serial port device along with a serial to USB converter
- Shielded with standard Foil-Al layer shielding as in most cables
Serial RS-232 9 Pin Cable Male to Female
- Connector Type: DB9 Male to DB9 Female.
- Cable diameter: 6mm
- Cable length:
- Fully shielded to prevent unwanted EMI/RFI interference.
- Fully molded connectors with thumbscrews provide quick and easy connection.
- All lines wired straight through.
- Used for extending a 9 pin serial male to male cable, or connect it to an old serial port device along with a serial to USB converter
- Shielded with standard Foil-Al layer shielding as in most cables
Ultrasonic Module HC-SR-04
- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Operating Current: 15mA
- Measure Angle: 15°
- Ranging Distance: 2cm - 4m
- Static current: < 2mA
- Level output: high-5V
- Output Signal:5V
- High Precision: Up to 2 mm
- Input Trigger Signal: 10µs TTL impulse
- Echo Signal: Output TTL PWL Signal
- High sensitivity ultrasonic range sensor
- Works with Arduino board
7*9cm PERFBOARD
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
1 CHANNEL 5V RELAY
- 1 channel relay board
- Operating voltage: 5V
- Maximum current: 2 A
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- configured as SINGLE POLE DOUBLE THROW( SPDT)
- LED status indicates relay ON/OFF state.
- Standard TTL level logic controlled
- One normally closed and one normally opened contact
- Compatible with any 5V microcontroller
- Dimension: 43*17*17mm
- Weight: 150gm