16×02 LCD display module with an IIC I2C interface
16×2 (1602) LCD Keypad Shield
- Operating Voltage:5V
- 5 Push buttons.
- RST button to reset Arduino program.
- Integrate a potentiometer for adjusting the backlight.
- Expanded available I/O pins.
- Blue light with white characters.
- Uses 4 Bit Arduino LCD Library
- Screen contrast adjustment
- Arduino Reset button
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
16×2 LCD display with an IIC/I2C serial interface
170 POINT MINI BREADBOARD
- Tie-points: 170 (10×17)
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Phosphor bronze nickel plated spring clips
- 1" hole spacing
- 10 columns and 17 rows, with 2 sections of 5 columns separated by approximately 0.3" allowing for straddling of a DIP package over the gap
- Ideal for high frequency and low noise circuits
- Use to prototype and test circuit designs
- Adhesive-backed for permanent mounting.
- Use: experimental, testing, robot
- Breadboard size: 46.7 * 34.8mm
17DOF BIPED ROBOT WITHOUT SERVO MOTRO
18nf 2000V DC Polyester Capacitor
- Capacitance: 18nf
- Voltage Rating DC: 2000 V
- Tolerance: 20%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:8x11.5 mm
- Operating Temperature: -40~85 C
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance.
18V DC Induction Cooker Fan
1Kg Load cell Electronic Weighing Scale Sensor
- Capacity: 1KG
- Rated output(MV/V): 2.0±0.15
- Accuracy class: C2
- Maximum number of load cell verification intervals(N max): 2000
- Minimum number of load cell verification intervals(Vmin): E Max/5000
- Combined error(%RO): <±0.030
- Creep(%RO/30min): 0.03
- Temperature effect on sensitivity(%RO/°C): 0.0016
- Temperature effect on zero(%RO/°C): 0.003
- Zero balance(%RO): 1.0
- Input resistance(O): 402±6
- Output resistance(O): 350±3
- Insulation resistance(MO<50V>): 5000
- Recommended excitation voltage(V): 10~15
- Compensated temperature range(°C): -10~+40
- Operating temperature range(°C): -35~+80
- Safe overload(%RO): 150
- Ultimate overload(%RO): 200
- Load cell material: Aluminium
- Connecting cable: ø4.2*350mm
- Dimensions :Â 10.92 x 9.52 x 0.51 cm
- weight:10gm