SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
- Model: SP1848-27145
- Open Circuit Voltage: 4.8 V
- Operating Temperature: 0 to 150 C
- Maximum Temperature: 150 Degree C
- Wire Length: 350mm
- 350Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 150C, with NM static protection.
- Quality tested cooling cells.
- Simple to install and operate.
- With 5v Booster board you can charge the cell phone
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
- Colour: Black
- Material: Glass Fibre
- Upper Frame size:90x60x2mm
- Lower Frame Size: 100x70x2mm
- Shock absorber Height: 10×12mm
- Light Weight.
- Vibration Resistant with included Shock absorbers.
- Shock Absorber material: Synthetic Rubber.
- Universal Fiber Mount Shock Absorber Plate for flight controllers
- Compact design
- Super lightweight
- Mounting holes on the bottom makes it easy to install
- Suit for different open-source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Weight: 2gm
XH-W1219 12V Digital Display Temperature Controller Module W/NTC Waterproof Temperature Sensor
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Rated Current: 10 Amp Max.
- Measurement Input: NTC10K
- Temp Probe Cable Length: 1 Meter
- Power Supply: DC12V
- Load Power: 120W
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: -50~110°C
- Temperature control range: -50~110°C
- Control precision: up to 0.1°C
- Up key: Press once to display the start temperature. Long press to set start temperature.
- Down key: Press once to display the stop temperature. Long press to set stop temperature.
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Dimensions 60 x 45 x 31 (mm)
- Weight: 55gm
XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch
- Rated Current: 10 Amp Max.
- Measurement Input: NTC10K
- Temp Probe Cable Length: 1 Meter
- Power Supply: DC12V,DC 24V
- Load Power: 120/240/1500W
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: -50~110°C
- Temperature control range: -50~110°C
- Control precision: upto 0.1°C
- Up key: Press once to display the start temperature. Long press to set start temperature.
- Down key: Press once to display the stop temperature. Long press to set stop temperature.
- Temperature setting upper and lower limits
- Dimensions 60 x 45 x 31 (mm)
- Weight: 55gm
100 RPM L-Shape BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage: 3~12 V DC
- Shaft Length: 8.5mm
- Shaft Diameter: 5.5mm (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
Square Geared Motor 60 RPM – High Torque
- Operating Voltage: 12 V DC
- No Load Current: ≤220 mA
- No load Speed: 60 RPM (at 12V)
- Full Load Current: ≤1300mA
- Rated Current: ≤4800 mA
- Rated Torque: 40 Kg-cm
- Shaft Length: 27 mm
- Shaft Diameter: 8 mm
- Length: 92mm
- Dimension Overall: 70 X 70 (Sq.) X 90 (Length)
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
Square Geared Motor 300 rpm- High Torque
- Power Supply: 12V DC
- RPM: 300
- Rated Torque: 7 kg-cm
- 8mm Dia shaft with M4 thread hole
- Gearbox diameter: 70 mm
- Motor Diameter: 42 mm
- Length without shaft: 106 mm
- Shaft length: 27mm
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Weight: 630gm
Square Geared Motor 30 RPM – High Torque
- Operating Voltage: 12 V DC
- No Load Current: ≤220 mA
- No load Speed30 RPM (at 12V)
- Full Load Current: ≤1300mA
- Rated Current: ≤4800 mA
- Rated Torque: 80Kg-cm
- Shaft Length: 27mm
- Shaft Diameter: 8mm
- Length:92mm
- Dimension Overall: 70 X 70 (Sq.) X 90 (Length)
- Mounting Holes: M5 threading (60 X 60 Square)
- Weight: 490gm
