DMO565R Power Switch IC
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0˚C to 70˚C
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150˚C ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265˚C
- Thermal Resistance to Ambient (θJA) 51˚C/W
TNY264PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 400mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 32Ω
- Package: DIP-8B
- Fully integrated auto-restart for short circuit and open loop fault protection – saves external component costs
- Frequency jittering dramatically reduces EMI (~10 dB) – minimizes EMI filter component costs
- Lowest component count switcher solution
74LS93 4-Bit Binary Counter IC
- 4-Bit Binary Counter
- Supply Voltage Range: 4.75V to 5.25V
- Supply Current Max.: 15mA
- Clock Frequency Max.: 32MHz
- HIGH Level Input Voltage Min.: 2V
- LOW Level Input Voltage Max.: 0.8V
- HIGH Level Output Voltage Min.: 2.7V
- LOW Level Output Voltage Max.: 0.5V
- High level Output Current Max.: -0.4mA
- Low level Output Current Max.: 8mA
- Input Clamp Voltage Max.: -1.5V
- Propagation Delay Time Max.: 16ns
- Package: DIP-14
CD4033BE CMOS Decade Counter Divider IC
HT12D Decoder IC
HT12E RF Encoder IC for wireless communication
MIP2C4 Power Device IC
L293D Push-Pull Four Channel Driver IC
- Push-Pull Four Channel Driver with Diodes
- 600mA Output Current Capability Per Channel
- 1.2A Peak Output Current (Non Repetitive) Per Channel
- Over Temperature Protection
- Internal Clamp Diodes
- Supply Voltage: 36V
- Enable Voltage: 7V
- Peak Output Current: 1.2A
- Total Power Dissipation: 4W
- Output Current: 600mA
- Package: DIP-16
TNY279PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 1200mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 4.5Ω
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8B
TNY176PN Off-line Switcher IC
- Drain Voltage: -0.3 to 650V
- Drain Peak Current: 720mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 16Ω
- Energy Efficient, Offline Switcher with Enhanced Flexibility and Extended Power Range
- 650 V rating optimized for non-active PFC applications
- Simple ON/OFF control, no loop compensation needed
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8C
