PT2315 2-Channel Audio Processor SMD IC
- 2-Channel Audio Processor IC
- CMOS Technology
- Least External Components
- Treble and Bass Control
- Loudness Function
- Input/output for External Noise Reduction System/Equalizer
- 2 Independent Speaker Controls for Balance Function
- Independent Mute Function
- Volume Control in 1.25 dB/step
- Low Distortion
- Low Noise and DC Stepping
- Controlled by I2C Bus Micro-Processor Interface
- Pin-to-pin Compatible with TDA7315
- Package:SO-20
74HC123 High-Speed CMOS Logic Dual Retriggerable Monostable Multivibrator IC
PT2313 4-Channel Audio Processor SMD IC
- 4-Channel Audio Processor IC
- CMOS Technology
- Least External Components
- Treble and Bass Control
- Loudness Function
- 3 Stereo Inputs with Selectable Input Gain
- Input/output for External Noise Reduction System/Equalizer
- 4 Independent Speaker Controls for Fader and Balance
- Independent Mute Function
- Volume Control in 1.25 dB/step
- Low Distortion
- Low Noise and DC Stepping
- Controlled by I2C Bus Micro-Processor Interface
- Pin-to-pin Compatible with TDA7313
- Package: SO-28
BC638 PNP Transistor -60V -0.5A
15nf 2000V DC Polyester Capacitor
- Capacitance: 15nf
- Voltage Rating DC: 2000 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
74121 Monostable Multivibrator with Schmitt-Trigger Input
PT2258 6-Channel Electronic Volume Controller IC
- CMOS Technology
- Low Power Consumption
- Least External Components
- Attenuation Range: 0 to -79dB at 1dB/step
- Operating Voltage: 5 to 9 V
- Â Low Noise, S/N Ratio>100dB (A-weighting)
- Â High Channel Separation
- I2C Bus Control Interface
- Selectable Address
- 6-Channel Outputs
- Â Available in 20 pins, DIP or SOP
PT2253 Electronic Volume Controller IC
-
CMOS Technology
-
Low Power Consumption
-
Operating Voltage Range : Vcc = 6 ~ 12 V (Backup Voltage is up to 4 V)
-
0dB to -68dB attenuation controlled by 2dB/step
-
2 Channels in each chip
-
Capable to control attenuation by a built-in oscillator and Up/Down Pin
-
Single Power Supply or Dual Power Supplies of (+) and (-) can be used
-
Wide Frequency Response Range
-
Very Low Harmonic Distortion
-
Available in 16 pins, DIP Package
TL084 General Purpose JFET Quad Operational Amplifier IC
- Supply Voltage Max: ±18V
- Input Voltage: ±15V
- Differential Input Voltage: ±30V
- Power Dissipation:Â 680mW
- Input Offset Voltage:Â 3mV
- Input Offset Current:Â 5pA
- Input Bias Current:Â 30pA
- Slew Rate: 16V/µs
- Package:Â DIP-14
- General purpose JFET quad operational amplifier
- Wide common-mode and differential voltage range
- Low input bias and offset current
- Output short-circuit protection
- Internal frequency compensation
0.1uf 400V DC Polyester Capacitor
- Capacitance: 0.1uf
- Voltage Rating DC: 400 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
TL081 JFET-Input Operational Amplifier IC
0.022uf 400V DC Polyester Capacitor
- Capacitance: 0.022uf
- Voltage Rating DC: 400 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance