Showing all 7 results

128*64 GREEN (LCD DISPLAY MODULE)

650.00 inc. GST
  • Display: 128*64 dots
  • Display Type: Positive Transflective
  • Display mode: STN/yellow green
  • Viewing direction: 6 o clock
  • Power supply: +5V
  • Driving Voltage: single power
  • Driving method: 1/64 duty cycle,1/9 bias
  • Weight: 400gm
  • Dimensions: 7*7*5cm
  • NO of data lines: 8 bit parallel

3D printer 128×64 Smart LCD controller for ramps 1.4

1,100.00 inc. GST
  • RAMPS 1.4 LCD 12864 intelligent controller.
  • With an SD card base on back.
  • Large screen display 128×64 LCD (3.2″)
  • SD card slot at the back, able to directly select a file and print
  • The product comes encoder parameter adjustment can be achieved, and the file selection print
  • Plug & play on the RAMPS, but need to modify the firmware to support.
  • LCD 12864 Smart Controller fully supported by Marlin Firmware.
  • Large screen display 128×64 LCD (3.2″)
  • SD card slot at the back, able to directly select a file and print
  • The product comes encoder parameter adjustment can be achieved, and the file selection print
  • Plug & play on the RAMPS, but need to modify the firmware to support.
  • LCD 12864 Smart Controller fully supported by Marlin Firmware.

4 PIN 128*64 OLED 0.96” BLUE

400.00 inc. GST
  • Super high brightness and high contrast
  • Driver IC: SSD1306
  • Input voltage: .3v to 6 v
  • Ultra-wide viewing angle >160 degree
  • Low power consumption with 0.04 W
  • Support wide range of Voltage: 3.3V to 5V
  • OLED self-lights, no backlight required
  • Fully compatible with Arduino
  • Communication via IIC, only two I/O ports
  • Working temperature: -30 degree to 80 degree
  • Dimension: 27*27*4.1mm
  • Supported platform: Arduino, 51 series, MSP430, SCR chips
  • No font is required, software takes the word MODULO
 

4 PIN 128*64 OLED 0.96” WHITE

350.00 inc. GST
  • High resolution: 128*64
  • Driver IC: SSD1306
  • Input voltage: 3.3v to 6 v
  • Ultra-wide viewing angle >160 degree
  • Display color: white
  • Super low power consumption
  • Support a wide range of input
  • Performs without the need for a backlight
  • Compatible I/O level: 3.3v, 5v
  • Fully compatible with Arduino
  • Interface: I2C
  • Working temperature: -30 degree to 70 degree
  • Dimension: 9*9*9cm
  • Size: 99gm
 

6 PIN 128*64 OLED 0.96” BLUE

350.00 inc. GST
  • Resolution: 128*64
  • Visual angle>160
  • Input voltage:3.3V to 6V
  • Compatible I/O level:3.3v, 5v
  • Only need 2 I/O port to control
  • Driver IC: SSD1306
  • Module volume:27*27*4.1mm
  • Working temperature: -30 degree to 70 degree
  • Full compatible with Arduino
  • Configured for SPI protocol and can be easily changed to IIC
   

6 PIN 128*64 OLED 0.96” WHITE

400.00 inc. GST
  • Super high brightness
  • Super high contrast
  • Visual angle>160
  • Input voltage: 3.3V to 6V
  • Compatible I/O level:3.3v, 5v
  • Communication mode: SPI, only need 2 I/O port to control
  • Driver IC: SSD1306
  • Module volume:27*27*4.1mm
  • Working temperature: -40 degree to 70 degree
  • Full compatible with Arduino
  • Configured for SPI protocol and can be easily changed to IIC
  • Weight: 7gm
 

7 PIN 0.96” 128*64 WHITE OLED

500.00 inc. GST
  • High resolution: 128*64
  • Input voltage: 3V to 5 V DC
  • Ultra-wide viewing angle >160 degree
  • Ultra-low power consumption
  • Fully compatible with Arduino, 51 series, MSP430, STM32/2, CSR IC.
  • Driver IC: SSD1306
  • Display colour: white
  • Performs without the need for a backlight
  • Interface: IIC/SPI, needs 4 I/O only
  • Compatible I/O level: 3.3v, 5v
  • Working temperature: -40 degrees to 70 degrees Celsius
  • Dimension: 27.3*27.8*3.7mm
  • Support a wide range of input
  • Size: 99gm