Showing all 3 results

LM1269 RGB Video Amplifier IC

  • 110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs
  • 110 MHz bandwidth preamplifier with full video signal parametric control
  • 4 external 8-bit DACs for bus controlled Bias and Brightness
  • Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
  • Power Save (Green) Mode, 80% power reduction
  • Matched to LM246X driver
  • Temperature Range 0ËšC to 70ËšC
  • Supply Voltage (VCC) 4.75V < VCC < 5.25V
  • Video Inputs 0.0V < VIN < 1.0VP-P
  • Thermal Resistance to Case (θJC) 32ËšC/W
  • Junction Temperature (TJ) 150ËšC
  • ESD Susceptibility (Note 4) 3.5 kV
  • ESD Machine Model (Note 5) 350V
  • Storage Temperature −65ËšC to +150ËšC
  • Lead Temperature (Soldering, 10 sec.) 265ËšC

STA 540 Audio Amplifier

  • High output power capability
-2x 38 W into 4 Ω at 18 V, 1 kHz, 10% THD -2x 34 W into 8 Ω at 22 V, 1 kHz, 10% THD -2x 24W into 4Ω at 14.4 V, 1 kHz, 10% THD -2x 15 W into 8 Ω at 16 V, 1 kHz, 10% THD -4x 13 W into 2 Ω at 15 V, 1 kHz, 10% THD -4x 11 W into 4 Ω at 18 V, 1 kHz, 10% THD -4x 7 W into 4 Ω at 14.4 V, 1 kHz, 10% THD
  • Minimum external components count:
-no bootstrap capacitors -no Boucherot cells -internally fixed gain 20 dB
  • Standby function (CMOS compatible)
  • No audible pop during standby operations
  • Diagnostic facilities:
-clip detector -output to GND short-circuit detector -output to VS short-circuit detector -soft short-circuit check at turn-on -thermal shutdown warning
  • Protection
-Output AC/DC short circuit -Soft short-circuit check at turn-on -Thermal cutoff/limiter to prevent chip from overheating -High inductive loads -ESD

TPA3118 PBTL digital amplifier board 1X60W 12V 24V Mono AMP

  • Working Voltage: DC 8-24V
  • Power Output: 60W
  • Applicable Speaker Impedance: 4-8 Ω
  • Sound quality is very good by using this module.
  • Mono digital audio power amplifier chip.
  • High output and low power consumption.