Showing all 3 results

A2212 BRUSHLESS DC MOTOR 1000KV

550.00 inc. GST
  • Motor KV: 1000
  • Operating voltage: 7.2V to 12V (2 to 3Li-poly or  6to10 NiCad)
  • LiPO Batteries: 2S-3S
  • No-load Current: 10 V: 0.5 A.
  • Current Capacity: 12A/60S
  • Maximum current:13Amp for 60Sec
  • Maximum Watts:150 Watt
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested
  • Minimum ESC Specification: 18A (30A Suggested)
  • Maximum operating temperature: + 80°C
  • Complete speed control because of a three-phase connection.
  • Long-life as there are no moving contact
  • Thrust @ 3S with 1045 propeller: 800gms approx
  • Thrust @ 3S with 0945 propellers: 475gms approx
  • Thrust @ 3S with 0845 propellers: 475gms approx
  • Motor Dimensions: 27.5 x 30mm
  • Weight of motor:50-60 grams
 

A2212 BRUSHLESS DC MOTOR 1800kv BLDC

400.00 inc. GST
  • KV: 1800
  • No load Current : 10 V : 0.5 A.
  • Current Capacity: 12A/60s
  • No Load Current @ 10V: 0.5A
  • Of Cells: 2-3 Li-Poly
  • Motor Dimensions: 27.5 x 30mm
  • Shaft Diameter: 934;3.17mm
  • Shaft diameter : 3.175mm.
  • Minimum ESC Specification: 18A (30A Suggested)
  • Thrust @ 3S with 1045 propeller: 1000gms approx
  • Thrust @ 3S with 0945 propeller: 650gms approx
  • Thrust @ 3S with 0845 propeller: 550gms approx

Brushless DC Motor BLDC Motor

550.00 inc. GST
  • Less overall maintenance due to absence of brushes
  • Reduced size with far superior thermal characteristics
  • Higher speed range and lower electric noise generation.
  • It has no mechanical commutator and associated problems
  • High efficiency and high output power to size ratio due to the use of permanent magnet rotor
  • High speed of operation even in loaded and unloaded conditions due to the absence of brushes that limits the speed
  • Smaller motor geometry and lighter in weight than both brushed type DC and induction AC motors.
  • Long life as no inspection and maintenance is required for commutator system
  • Higher dynamic response due to low inertia and carrying windings in the stator
  • Less electromagnetic interference
  • Low noise due to absence of brushes