Showing all 7 results

5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE

400.00 inc. GST
  • Module nature: non isolated buck
  • Input voltage: 7V-24V DC
  • Output voltage: 5V DC
  • Output current: 4A
  • Conversion efficiency:96% (max)
  • Switching frequency: 340KHz
  • Output ripple:30mv (max)
  • Load regulation: +/-0.5%
  • Voltage regulation: +/-2.5%
  • Operating temperature: -40 degree to +85 degree Celsius
  • Rectification: nonsynchronous rectification
  • Short circuit protection
  • Dimensions:60*21*14mm
  • Weight: 150gm

AMS1117 3.3V POWER SUPPLY MODULE

99.00 inc. GST
• Input: DC 4.5V – 12V (input voltage must be more than the output voltage (more than 1V)) • Output: 3.3V, 800mA (load current cannot exceed 800mA) • Onboard AMS1117 chip. • Onboard power indicator to indicate power is turned on: Red LED. • Output voltage interface, connection to facilitate the experimental. • Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments. • Small Compact Size, 4Pin Type, Breadboard Friendly. • 2P single row pin input and output for easy connection • Dual-panel design, the layout is nice

AMS1117 5V POWER SUPPLY MODULE

• Input: DC 6.5V – 12V (input voltage must be more than the output voltage (more than 1V)) • Output: 5V, 800mA (load current cannot exceed 800mA) • Onboard AMS1117 chip. • Onboard power indicator to indicate power is turned on: Red LED. • Output voltage interface, connection to facilitate the experimental. • Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments. • Small Compact Size, 4Pin Type, Breadboard Friendly. • 2P single row pin input and output for easy connection • Dual-panel design, the layout is nice

DC POWER SUPPLY MODULE FOR DC ADAPTER PLATE

99.00 inc. GST
  • Power output interface: 2 way VCC r road GND
  • The safe and reliable connection between appliances and power source
  • Hole diameter: 6.5mm
  • Pin diameter: 2.1mm
  • Connector size: 2.1mm
  • Material: FR4
  • Dimension: 2.8*1.3cm
  • Weight: 3.2g
 

DC-DC BOOST CONVERTER STEP UP I/P: 10V – 32V O/P: 12V -35V/6A

650.00 inc. GST
  • Input voltage: 10V-32V DC
  • Output voltage: 12V-35V DC
  • Output Current: 6A
  • Output ripple: 2% MAX
  • Output power: 150 W
  • Working temperature: -40 degree to 85 degree
  • No load current:25mA
  • Voltage regulation:+-0.5%
  • Load regulation:+-0.5%
  • Dynamic response speed: 200uS 5%
  • The non-isolated step-up power conversion module
  • Onboard LED illuminates when the voltage is applied to the module
  • Equips Multi-turn Potentiometer.
  • Easy to drive 65W 90W dual-core notebook.
  • The output voltage is continuously adjustable on OUT+ and OUT- screw terminals
  • Dimension:2 .60*1.85*1.1inch
   

LM2577 Boost power module

500.00 inc. GST
  • Input voltage range : 3-34V DC
  • Output voltage range : 4-35v DC adjustable
  • Output current:3A
  • Voltmeter range:0 to 40V,error +-0.1v
  • Multiple output regulator.
  • One button to switch input and output voltage display.
  • Power-down memory function.
  • Press the button for 3 seconds can turn OFF/ON the LED display.
  • Multiple output regulator.
  • When adjusting the blue potentiometer, please use a multimeter to monitor the voltage
  • Rotating Clockwise can raise the voltage while rotating counter clockwise could lower the voltage

LM2577 Step-Up Voltage Regulator IC

185.00 inc. GST
  • Step-Up Voltage Regulator
  • Requires few external components
  • NPN output switches 3.0A, can stand off 65V
  • Wide input voltage range: 3.5V to 40V
  • Current-mode operation for improved transient response, line regulation, and current limit
  • 52 kHz internal oscillator
  • Soft-start function reduces in-rush current during start-up
  • Output switch protected by current limit, under-voltage lockout, and thermal shutdown