HMC5883L
Ublox NEO-M8N GPS Module with Compass for APM with extra connector for Pixhawk
- Ready to Connect to All APM FC with 5-pin connector Attached
- Receiver type 72-channel M8 engine
- Galileo-ready E1B/C (NEO-M8N)
- update rate1 Single GNSS: up to 18 HZ
- Position accuracy 22.0 m CEP
- Acquisition2 Cold starts: 26 s
- Sensitivity2 Tracking & Nav: –167 dBm
- On-board Compass
- Dimensions: Outer diameter 54mm
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
- SBAS L1 C/A: WAAS, EGNOS, MSAS.
- Assistance AssistNow GNSS Online.
- Assist Now GNSS Offline (up to 35 days)3.
- Assist Now Autonomous (up to 6 days).
- OMA SUPL & 3GPP compliant
- Oscillator TCXO (NEO-M8N/Q).
- Crystal (NEO-M8M).
- RTC crystal Built-In.
- Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
- Lowest noise figure (NEO-M8N/Q).
- Anti-jamming Active CW detection and removal.
- Extra onboard SAW bandpass filter (NEO-M8N/Q).
- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
- Supported antennas Active and passive.
- Odometer Travelled distance.
- Data-logger For position, velocity, and time (NEO-M8N).
- Weight 33gm
4-axis Flight Control Sensor HMC5883L BMP085 MWC GY-651
- Model: GY-651
- Use the chip: HMC5883L + BMP085
- Power supply:3-5v (internal low dropout regulator)
- Size: 13.5mm * 15.8mm (pin spacing standard 2.54mm)
- Communication modes: standard IIC communication protocol
- Magnetic field range: ± 1.3 to ± 8.1 gauss
- Pressure range: 300-1100hPa
- Chip 12bit AD converter, 16-bit data output Machine welding process to ensure quality
- Size: 18mmx14mm
GY-88 10 Axis HMC5883L MPU6050 BMP085 IMU Module for Arduino
- MPU 6050 Motion Sensor module: 3-axis gyroscope, 3-axis accelerometer
- HMC5883L module：three-axis magnetic field module
- BMP085 barometer pressure sensor
- Chip: MPU-6050
- Power supply: 3v-5V power
- gyroscope range: + 250 500 1000 2000 °/ s
- Acceleration range: ± 2 ± 4 ± 8 ± 16 g
- HMC5883L range: ± 1.3-8 Gauss
BMP085 9-Axis IMU Magnetic Acceleration Gyroscope Atmospheric Pressure Module
- Nine-axis module (three-axis gyroscope + three-axis acceleration + 3-axis magnetic field + pressure)
- Use chips: L3G4200D + ADXL345 + HMC5883L + BMP085
- Communication: IIC communication protocol (fully compatible with the 3-5v system)
- Mounting hole 3mm
- The power supply: 3-5 v (internal low voltage difference voltage stabilizing)
- Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output
- The gyroscope range: + 250 500 1000 2000 °/s
- Acceleration range: ± 2 ± 4 ± 8 ± 16 g
- Standard 2.54mm pin interface, easy breadboard perforated plate experimental connection
- Adopt gold PCB process
- Module size: 25.8mm * 16.8mm
Generic GY-85 BMP085 Sensor Module 9 Axis 6DOF 9DOF IMU Sensor
10D OF 9-AXIS GY-87
- Power supply: DC 3.3V TO 5V
- 3 Axis Gyro+ Acceleration+ Magnetic field
- Air pressure module
- Inbuilt ultra-low noise linear LDO voltage regulator
- Inbuilt onboard filters. which reduce noise from motor and another high current
- Communication: I2C protocol
- Power LED
- Designed for 5V logic
- Can easily select two I2C addresses for MPU6050 by soldered jumper
- Dimension: 2.2*1.7cm
- Size: 6gm