IR Receiver
IR LED Blue 5mm
IR Receiver Black 5mm
- Spectral range (nm):700-1050
- Light Current IL ≥3mA
- Dark current ID< 0.1uA
- Breakdown Voltage> 30
- Maximum forward current 25mA
- Power dissipation Pd(MW): 100
- Package: Through-hole
- Diameter: 5mm
- Maximum reverse voltage 5V
- Maximum Forward Voltage 2 V-1.3V
- Operating Temperature(Celsius) -40°C- +100°C
- Fast Response
- High photosensitivity
- High reliability
IR Receiver 3 Leg Black Metal
- Sensing distance: 45m
- Supply voltage: 2.5V- 5.5V
- Mounting type: through hole
- Operating temperature: -25°C ~ 85°C (TA)
- Directivity: 45°
- Supply Current: 350µA
- Power Dissipation: 10 mW
- Proper Shielding Against EMI
- Comes with metal legs
- High Immunity against Ambient Light
- Photo Detector and Preamplifier in single Package
- Low Supply Current
- Insensitive to Noise and Supply Voltage Ripple
TSOP 1738 IR Receiver
- Supply Voltage: 5 V
- Operating current: 5mA
- Power consumption: 0.4 to 1.0 mA
- Ee irradiation: 0.35 mW/m2 typ.
- Angle of detection: 90
- Dimensions of the casing (mm): 12.5 x 10 x Thickness 5.8
- Temperature range: -25 C to +85 C
- Can detect IR signals from Remotes (38kHz)
- High Range and wide coverage area.
- Will respond only to IR signals, due to high immunity against ambient light
- Low power consumption
- Has in-built pre amplifier
- TTL and CMOS compatible
IR Receiver 3 Leg Black Small
- Sensing distance: 45m
- P.F frequency: 38.0 kHz
- Supply voltage: 2.5V- 5.5V
- Mounting type: through hole
- Operating temperature: -25°C ~ 85°C (TA)
- Directivity: 45°
- Supply Current: 350µA
- High-Level Pulse Width: 0.8 ms
- Low-Level Pulse Width: 0.8 ms
- Power Dissipation: 10 mW
- Proper Shielding Against EMI
- High Immunity against Ambient Light
- Photo Detector and Preamplifier in single Package
- Low Supply Current
- Insensitive to Noise and Supply Voltage Ripple
IR LED 3mm
MOQ : 2 NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
IR LED 5mm
MOQ : 5NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR Obstacle Avoidance Proximity Sensor Module
IR-08H Infrared Obstacle Avoidance Sensor Module
- Infra-Red IR Emission Receiver IR-08H for Arduino
- Onboard with HS0038B HS38B IR receiver
- Operating Voltage: 3V – 5.5V
- Detection range : 2cm – 40cm
- Output level: Low logic level when an obstacle is detected
- Working current: 20mAh
- Working temperature: -10’C~+50’C
- IO interface: 4 line (-/+/S/EN)
- Output signal: TTL Level
- Adjusting mode: Multi resistance regulation
- Effective angle: 35°
- Size: 4.5 * 1.1cm(approx)
- Easy to assemble and use
- On-board detection indication
- Pin Connection to the board: 4 pins
- A pre-set knob to fine-tune distance range
IR Proximity Module using TSOP
- Operating wavelength: Near-infrared region 700 nm to 1400 nm
- Main Chip: LM358
- Operating Voltage Range: 3.6V-5V DC
- Average Current Consumption: 06mA
- Distance Measuring Range: 2 to 30cm
- Detection angle: 35 °
- Easy to assemble and use
- On-board detection indication
- the effective distance range of 2cm to 80cm
- A pre-set knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board
- 3mm screw holes for easy mounting
- Dimensions: 48 x 14 x 8mm
- Weight:5gm
IR Infrared Obstacle (Imported)
- Operating wavelength: Near-infrared region 700 nm to 1400 nm
- Main Chip: LM358
- Operating Voltage Range: 3.6V-5V DC
- Average Current Consumption: 06mA
- Distance Measuring Range: 2 to 30cm
- Detection angle: 35 °
- Easy to assemble and use
- On-board detection indication
- the effective distance range of 2cm to 80cm
- A pre-set knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board
- 3mm screw holes for easy mounting
- Dimensions: 48 x 14 x 8mm
- Weight:5gm