Showing all 9 results

1 CHANNEL 12V RELAY

₹90.00 inc. GST
  • 1-Channel relay interface board
  • Operating voltage: 12V DC
  • Provide high current relay of 15A
  • For quick and easy connection high-quality screw terminals provided
  • Can control both AC & DC appliances
  • LED status indicates relay ON/OFF state.
  • High current relay of 10A @250 V AC/10A@ 30V DC
  • Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
  • For easy accessibility input signal pin connected to burg sticks
  • Dimension: 43*17*17mm
  • Weight: 150gm
   

1 CHANNEL 5V RELAY

₹100.00 inc. GST
  • 1 channel relay board
  • Operating voltage: 5V
  • Maximum current: 2 A
  • Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
  • configured as SINGLE POLE DOUBLE THROW( SPDT)
  • LED status indicates relay ON/OFF state.
  • Standard TTL level logic controlled
  • One normally closed and one normally opened contact
  • Compatible with any 5V microcontroller
  • Dimension: 43*17*17mm
  • Weight: 150gm
 

12V 1 Channel Relay Module Infrared IR Remote Switch Control

₹700.00 inc. GST
  • Work status: Self-locking
  • Dedicated remote.
  • Indicator LEDs.
  • Ideal for home automation.
  • DC 12V Home lighting system
  • Remote control switch

2 CHANNEL 5V RELAY

₹150.00 inc. GST
  • High current relay
  • Two LED S to indicate relays ON/OFF status
  • Low-level trigger expansion board
  • Opto isolation circuitry
  • Works with logic level signal 3.3V or 5V devices
  • Can be used as normally open (NO) or normally closed (NC)
  • Back EMF protection
  • Ensures diode current protection
  • AC control voltage: 250v @mx10A
  • DC control voltage: 30V @max 10A
  • Easy installation and fixing
         

4 CHANNEL 5V RELAY

₹250.00 inc. GST
  • 4-Channel relay interface board
  • Operating voltage range: 3.3V to5V
  • Maximum current: 10A
  • Supply current: 20 mA
  • High current relay of 10A @250 V AC/10A@ 30V DC
  • Control signal: TTL level
  • For quick and easy connection high-quality screw terminals provided
  • Pull-down circuit to avoid malfunction
  • Power supply indicator
  • Can control both AC & DC appliances such as DC motors, solenoid valves, lamps, etc.
  • LED status indicates relay ON/OFF state.
  • Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
  • For easy accessibility input signal pin connected to burg sticks
  • Operating temperature: -40 to 85 degrees Celsius
  • Dimension: 76*56*17mm
  • Weight: 7gm
   

4 Channel 5V Relay Module Shield For Arduino

₹225.00 inc. GST
  • Product Type: 4-Channel relay module
  • Dimensions: 75 mm x 55 mm x 19.3 mm
  • Weight: 61 g
  • Relay colour: Blue
  • PCB colour: Blue
  • Maximum output of relay: AC250V 10A and Dc30V 10A
  • Number of Relays: 4
  • Control signal type: TTL level
  • Input voltage: 5v
  • Compatible with: Arduino, AVR, PIC, ARM, Raspberry Pi etc
  • Package contains: 1 piece of 4 channel relay module

6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

₹550.00 inc. GST
  • Operating voltage: 6 - 30V DC
  • 1 Channel delay trigerred relay module
  • Delay time: 0.1 second ~ 999 minutes
  • Seven Segment Display
  • Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
  • Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
  • Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
  • Quiescent current: 20mA
  • Operating current: 50mA
  • Service life: more than 100,000 times
  • Working temperature: -40°C-85°C
  • With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
  • Dimension: 6.2 * 3.8 * 1.7cm

8 CHANNEL 5V RELAY

₹450.00 inc. GST
  • Relay operating voltage: 5V
  • 8 channel
  • High impedance controller pin
  • One normally closed contact and one normally opened
  • Useful for appliances control
  • Power supply indicator and control indicator lamp
  • Pull-down circuit to avoid malfunction
  • Can control both DC and AC to 220v AC load
  • Works with both 3.3 V and 5 V logic with the less current drive
  • 3 terminals per SPDT relay
  • Standard interface can be directly controlled by a microcontroller like Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
  • Dimension: 7*6.4*1 inch
         

Solid Relay Module 1 channel 5v low level trigger for Arduino

₹275.00 inc. GST
  • 5V Solid State Relay
  • Output With resistive fuse 240V 2A.
  • Input Power: 5V DC (160MA).
  • Input control signal voltage: 0 - 2.5V state low relay OFF/3.3V - 5V state high relay ON
  • Working current: 12.5mA.
  • Trigger voltage: 3.3-5V.
  • Trigger current: 2mA.
  • Rated output load: 100V to 240V AC (50Hz/ 60Hz) 2A per channel
  • Rated input power: 5V, 160mA (all channels ON)
  • Triggered at Low level (or Active Low)
  • Separate LEDs showing the status of each Solid-State Relay
  • Input control signal:
-Low Signal (Solid-State Relay ON / CLOSE), 0V- 2V or GND -High Signal (Solid-State Relay OFF / OPEN), 3.3V - 5.0V or leave it floating
  • Used in PLC control, home intelligent control, industry, electronic DIY etc.
  • Dimension: 25mm x 34mm x 22mm