Showing all 5 results

GP2Y1010AU0F Optical Dust Sensor

400.00 inc. GST
  • Operating Voltage: 4.5V to 5.5V
  • Low Current Consumption: 20mA max
  • Sensitivity: 0.5V/(0.1mg/m3)
  • Clean-air voltage: 0.9V typical
  • Storage temperature:-20 ~80 degrees Celsius
  • Minimum Detectable Dust Size: 0.5µm
  • Smallest particles detected value: 0.8 micron
  • Dust Density Sensing Range: Up to 580 µg/m3
  • Sensing Time: Less than 1 Second
  • Service life: 5 years
  • The presence of dust can be detected by the photometry of only one pulse
  • Enable to distinguish smoke from house dust
  • Lead-free and RoHS directive compliant
  • Operating temperature:-10 -65 degrees Celsius
  • Dimensions: 46.0 x 30.0 x 17.6 mm
  • Weight: 15gm

MQ135 Module

175.00 inc. GST
  • Working voltage: DC 5V
  • Working Current: 150mA
  • DOUT: TTL output
  • AOUT: Analog output
  • Preheat time: Over 20s
  • Detection Range: 10 - 300 ppm NH3, 10 - 1000 ppm Benzene, 10 - 300 Alcohol
  • Sensitivity to Ammonia, Sulphide, and Benzene steam
  • With signal output instructions
  • The TTL output signal is a low level
  • Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
  • Sensitive for benzene, alcohol, smoke
  • Fast response and recovery
  • Adjustable sensitivity
  • Signal output indicator
  • Dimension: 32mm x 22m x 27mm

MQ135 SENSOR

180.00 inc. GST
  • Operating Voltage: 3.3 – 5V.
  • Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.
  • Analog output voltage: 0V to 5V
  • Digital output voltage: 0V or 5V (TTL Logic)
  • Detection range:10 ppm-300 ppm NH3, 10 ppm-1000 ppm Benzene, 10 ppm-300 ppm Alcohol
  • Heating voltage (high): 5V ± 0.1
  • Heating voltage (low): 1.4V ± 0.1
  • Load resistance: Adjustable
  • Heating resistance: 33Ω ± 5%
  • Heating consumption: less than 800mW
  • Detection temperature: 20℃±2℃
  • Relative humidity: 65%+-5%RH
  • Preheat duration 20 seconds
  • Can be used as a digital or analogue sensor
  • The sensitivity of Digital pin can be varied using the potentiometer
  • It has a long life and low cost.
  • Possesses high sensitivity to ammonia, benzene, sulfide gases.
  • simple drive circuit

MQ2 Sensor

150.00 inc. GST
  • Operating Voltage: +5V
  • Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane
  • Analogue output voltage: 0V to 5V
  • Digital Output Voltage: 0V or 5V (TTL Logic)
  • Preheat duration 20 seconds
  • Can be used as a digital or analogue sensor
  • Load resistance: 20 KΩ
  • Heater resistance: 33Ω ± 5%
  • Heating consumption: <800mw
  • Sensing Resistance: 10 KΩ – 60 KΩ
  • Detection range: 200 – 10000ppm
  • Preheat Time: Over 24 hour
  • High sensitivity to LPG, Propane, and Hydrogen
  • The Sensitivity of a Digital pin can be varied using the potentiometer

SHARP Air detection sensor dust sensor GP2Y1010AU0F KG017

499.00
  • Operating Voltage: 4.5V to 5.5V
  • Low Current Consumption: 20mA max
  • Sensitivity: 0.5V/(0.1mg/m3)
  • Clean-air voltage: 0.9V typical
  • Storage temperature:-20 ~80 degrees Celsius
  • Minimum Detectable Dust Size: 0.5µm
  • Smallest particles detected value: 0.8 micron
  • Dust Density Sensing Range: Up to 580 µg/m3
  • Sensing Time: Less than 1 Second
  • Service life: 5 years
  • The presence of dust can be detected by the photometry of only one pulse
  • Enable to distinguish smoke from house dust
  • Lead-free and RoHS directive compliant
  • Operating temperature:-10 -65 degrees Celsius
  • Dimensions: 46.0 x 30.0 x 17.6 mm
  • Weight: 15gm