I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
₹300.00 Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
- Type: Aluminum Electrolytic Capacitor
- Structure: Trimmer Capacitor
- Capacitance: 0.22UF-470UF
- Tolerance: 20%
- Lead Spacing: 5 mm
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:12.5*21 mm
- Operating Temperature: -25~105C
These 120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitors have a long life and great reliability (12000 hrs). It also has a large ripple current at a high frequency and good smoothing properties. These electrolytic capacitors may be used in a variety of applications, including power supplies, audio amplifiers, and hobby projects. An electrolytic capacitor is a type of capacitor that uses an electrolyte to operate. This results in a higher capacitance than other types of capacitors. Because of their enormous capacitance, these capacitors are commonly employed in DC power supply circuits. And it’s tiny, which helps to decrease ripple voltage and is useful for coupling and decoupling applications.
An electrolyte is a liquid or gel that has a high concentration of ions in it. These electrolytic capacitors are available in two forms: wet-electrolyte and solid polymer, both of which are frequently composed of tantalum or aluminium, though other materials might be utilised as well. Aluminium electrolytic capacitors are used in a variety of applications, including power supply, computer motherboards, and a variety of household appliances. 12 values 120pcs 0.22UF-470UF The following values are available in the aluminium electrolytic capacitor selection kit:
- 50V 0.22F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 0.47F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 1 F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 2.2F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 4.7F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 10F +/- 20% 105 Celsius diameter 4 x 7 mm
- 50V 22F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 33F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 47F +/- 20% 105 Celsius diameter 4 x 7 mm
- 16V 100F +/- 20% 105 Celsius diameter 5 x 7 mm
- 16V 220F +/- 20% 105 Celsius diameter 5 x 7 mm
- 16V 470F+/- 20% 105 Celsius diameter 6 x 7 mm

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
6 Pin RMC Connector
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.