I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-9%
33nf 2000V DC Polyester Capacitor
Original price was: ₹20.00.₹15.00Current price is: ₹15.00. inc. GST
CD4026 CMOS Decade Counter with Decoded 7-Segment Display Outputs
Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
1KOhm ¼ Watt Carbon Film Resistor
Original price was: ₹11.00.₹10.00Current price is: ₹10.00. inc. GST
MOQ :10 NOS
- 1KΩ
- ¼ Watt
- 5% tolerance
- RoHS Compliant / Lead free
Description
A carbon Film Resistor is a resistive element made out of a thin carbon film on a non-conducting material. Axial resistors of this sort are one of the most common. Tolerance, stability, and TCR are all strengths of carbon film resistors. Furthermore, owing to the low voltage coefficient, the resistors have low noise qualities and a good linearity function. As a result, metal film resistors are frequently recommended in circuits where tight tolerance, low-temperature coefficient, and low noise qualities are important. They may be used in a variety of ways, such as active filters or bridge circuits.
The 1 KOhm 1/4 Watt Carbon Film Resistor is a fixed resistor that employs carbon film to confine electrical current to a specific threshold. Resistors of this type are commonly used in electrical circuits. Carbon film resistors are commonly used in high-voltage and high-temperature applications. With a nominal temperature of 350°C, operating temperatures can go up to 15kV. High-voltage power supply, radar, x-rays, and lasers are all examples.
Carbon Fim Resistor is made by depositing a carbon film over a ceramic substrate that serves as an insulator. The carbon coating also blocks electrical current to a certain extent. The insulating ceramic, on the other hand, does not allow heat to pass through, allowing the carbon film resistor to survive high temperatures without being destroyed. Meanwhile, carbon film resistors with tolerance values ranging from 1 ohm to 1 megaohm have an honest tolerance value.
Reviews (0)
Shipping & Delivery
Related products
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
Reviews
There are no reviews yet.