I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
4-wheel Robot Smart Car Chassis Kits Car Model with Speed Encoder
₹1,250.00 Original price was: ₹1,250.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
- Operating Voltage: 3-6V VDC
- Gear Ratio: 1:48
- No-load speed(5V): about 200 RPM
- Rated Torque: 0.8 Kg.cm @ 5V
- Load current: 170mA (when it is 4.5V)
- Shaft Length: 10 mm
- Shaft Type: 6 mm, Double-D
- Loading Capacity: Max 2.5Kg
- Wheel Diameter: 65 mm
- Wheel Width: 27 mm
- Body Material: Plastic
- Grip Material: Rubber
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- Double-layer structure, much of mounting holes, enough space
- Easy to install a variety of control panels, sensors
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity
- Easy interface with Arduino development platform
- Enormous space between middle & bottom chasis
4 Wheel Smart Car Robot Chassis Kit with Speed Encoder designed as an ideal electronic toy for both kids and adults. This is the most economical and newest robot car kit with a simple mechanical structure that makes it easy to install and function well. This Learning & Education Robot Car Chasis kit designed as an educational toy that integrates education, entertainment, and environmental protection, and can create a vivid and tangible course for children.
4-Wheel Robot Chassis Kit, an easy to assemble and use robot chassis platform. This Chassis kit provides you with everything you need to give your robot. And a fast four-wheel-drive platform with plenty of room for expansion to add various sensors and controllers. Assembling this toy helps kids to practice their brain. Thus express your kid’s interest in science, extremely helping your children on creation.
By simply connecting your Arduino/Raspberry Pi and Motor Driver and you can start programming your robot. The large space with predrilled holes for mounting sensors and electronics as per your requirement ensures easy assembling of the robot car. This robot chassis lets you get your mechanical platform ready in minutes and quickly start your robot building process.
Wheeled Robots are the most prominent robot platforms and are quite easy to run, maintain and use. Easy to form, supplied with assembly steps and schematic. Moreover, Kit may be a good way to urge started with four-wheel robot chassis platform. Highly recommended for beginners and novice users. Perfect Gift for Small Builders 10 Years and also for adults. The parts intended for small hands and easily puts together so that the children concentrate on the building process!

Related products
“2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit No battery”
1 meter 7 x 7 mm Cable drag Chain Wire Carrier With End Fits
4 Wheel Metal Chassis Grey for Robotics
- Dimensions: 194x 104 x 48 (LxWxH).
- Weight: 270 gm.
- Material: Metal sheet.
- Colour: Grey.
- Sheet Thickness: 1.5 mm.
- Many perforated holes have given for easy attachment of development board and sensors.
- High durable, non-flexible
- Lightweight
- Can be re-shaped easily
- Resistant to corrosion
- Highly rigid
- Compatible with a single type of screw
- The chassis support one rotary castor wheel for balancing the robot & to rotate easily.
Blade Propeller for 8520 8.5x20mm
- Length: 8.5″.
- Pitch: 20″.
- Diameter: 55mm
- Centre hole diameter: 0.97mm
- Colour : Black & Red
- suitable for 90mm-150mm DIY Micro Quadcopter Frame Kits
- Suitable for 1mm shaft diameter Coreless motor 7*16mm, 7*20mm, 8.5*20mm
- Suitable for 1mm shaft diameter Carbon Brush motor N20, M20, N30
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Eachine RatingKing F14 1000TVL CCD 110 Degree Mini FPV Camera 411008 1/14 RC Car Part
- Brand: Eachine.
- Item: 1000TVL CCD 110 Degree Mini FPV Camera 411008.
- Input Voltage: 5V.
- Power Consumption: 55mA@ 5v.
- Lux: 0.08Lux/ F1.2.
- Sensor: 1/3 "CCD.
- Format: NTSC/PAL (Free switch).
- Resolution: Ultra High Definition 1000TVL.
- PAL: 976H X 582V.
- NTSC: 976H X 494V.
- Lens: 2.8mm IR coated.
- FOV: 110 °.
- Operating temperature: 0 to 40°C.
- With 1/3'' CCD sensor.
- With lens cover,well protecting the lens.
- With WRD function in default.
- Without OSD.
- Super lightweight, ultra-low power consumption
- Camera size: 28 * 24.5 * 17.5mm.
- Len Size: 17mm *14mm.
- Net Weight: 10g
Metal mechanical Arm Gripper claw
- Metal Gripper Robotic Arm
- Operating Voltage: 4.8V to 6.6V
- Material: Aluminum Alloy
- The Kit comes with hardware, unassembly
- Clamp Max open: 55mm
- Clamp total length:108mm
- Clamp total width:98mm (when the Clamp open
- Light weight plank kit
- Compatible with HS322, HS422, MG995, SG5010 servo
- Degree of Freedom (DOF): 2
- Bearing Type: Ball Bearing
- Weight: About 68g
Robot Wheel for BO Motor – 62x25mm – Yellowa
Smart Robot Car Chassis Kit 2 Wheels
- This car is the tachometer encoder.
- Works with a 4 AA battery box (batteries not included).
- Used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Laser Cut Acrylic Chassis
- Two Dual Shaft Motors For Either Side
- Universal Castor To Avoid Slippage
- Placeholders For Different Sensors, Servos, and Modules
- Has Strong Torsion, With 130 Strong Magnetic Dc Motor. Speed Ratio 1: 48
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Diameter x Height).

Reviews
There are no reviews yet.