I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
70S600P7 Infineon CoolMOS P7 N-channel power MOSFET
The Infineon 70S600P7 is a 600V CoolMOS™ P7 N-channel power MOSFET offering low losses, high efficiency, and robust performance for modern power systems.
The Infineon 70S600P7 is a 600V CoolMOS™ P7 series N-channel power MOSFET, engineered for high-efficiency, low-loss switching in modern power conversion systems. Combining excellent figure-of-merit (FOM) and optimized gate charge characteristics, this MOSFET provides outstanding performance in power supplies, LED drivers, adapters, and industrial applications.
With its low R<sub>DS(on)</sub>, reduced switching losses, and improved thermal behavior, the 70S600P7 enables designers to achieve higher power density and greater system reliability. Its robust avalanche capability and integrated gate protection make it ideal for both hard- and soft-switching topologies.
The CoolMOS™ P7 technology also ensures superior EMI behavior and simplified gate driving, delivering excellent efficiency even at light-load conditions.
Key Features:
-
Drain-Source Voltage (V<sub>DS</sub>): 600V
-
Continuous Drain Current (I<sub>D</sub>): ~7A (at 25°C, typical)
-
R<sub>DS(on)</sub>: Ultra-low for reduced conduction loss
-
Technology: Infineon CoolMOS™ P7 superjunction
-
Gate Charge (Q<sub>g</sub>): Optimized for fast switching
-
High Efficiency & Low Switching Losses
-
Robust Body Diode Performance
-
Excellent EMI Behavior
-
Enhanced dv/dt and Avalanche Ruggedness
-
Package: TO-220 / DPAK (varies by version)
-
Operating Temperature: –55°C to +150°C

Related products
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
J-link Emulator V8 all-ARM JTAG Adapter Converter for TQ2440 MINI2440 K98
Peak Green PLA 1.75mm 1 KG Filament-Wanhao
USB-to-Serial Converter
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified

Reviews
There are no reviews yet.