I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
70S600P7 Infineon CoolMOS P7 N-channel power MOSFET
The Infineon 70S600P7 is a 600V CoolMOS™ P7 N-channel power MOSFET offering low losses, high efficiency, and robust performance for modern power systems.
The Infineon 70S600P7 is a 600V CoolMOS™ P7 series N-channel power MOSFET, engineered for high-efficiency, low-loss switching in modern power conversion systems. Combining excellent figure-of-merit (FOM) and optimized gate charge characteristics, this MOSFET provides outstanding performance in power supplies, LED drivers, adapters, and industrial applications.
With its low R<sub>DS(on)</sub>, reduced switching losses, and improved thermal behavior, the 70S600P7 enables designers to achieve higher power density and greater system reliability. Its robust avalanche capability and integrated gate protection make it ideal for both hard- and soft-switching topologies.
The CoolMOS™ P7 technology also ensures superior EMI behavior and simplified gate driving, delivering excellent efficiency even at light-load conditions.
Key Features:
-
Drain-Source Voltage (V<sub>DS</sub>): 600V
-
Continuous Drain Current (I<sub>D</sub>): ~7A (at 25°C, typical)
-
R<sub>DS(on)</sub>: Ultra-low for reduced conduction loss
-
Technology: Infineon CoolMOS™ P7 superjunction
-
Gate Charge (Q<sub>g</sub>): Optimized for fast switching
-
High Efficiency & Low Switching Losses
-
Robust Body Diode Performance
-
Excellent EMI Behavior
-
Enhanced dv/dt and Avalanche Ruggedness
-
Package: TO-220 / DPAK (varies by version)
-
Operating Temperature: –55°C to +150°C

Related products
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Turbidity Sensor Module Testing Suspended Particle for Arduino
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified

Reviews
There are no reviews yet.