I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
7809C 9V Positive Voltage Regulator IC
₹35.00 Original price was: ₹35.00.₹25.00Current price is: ₹25.00. inc. GST
- Output Voltage:Â 9V
- Line Regulation (max):Â 180mV
- Load Regulation (max):Â 180mV
- Dropout Voltage:Â 2V
- Output Resistance: 17mΩ
- Output current in excess of 1A
- Internal thermal overload protection
- No external components required n
- Output transistor safe area protection
- Internal short circuit current limit
- Available in the aluminum TO-3 package
LM7809 designed as three terminal regulators is available with several fixed output voltages. These regulator ICs offer very acceptable levels of performance for a wide range of applications. These regulators are widely used in local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow these regulators to used in logic systems, instrumentation, HiFi, and other solid state electronic equipment. And additionally, to the present, these IC available at an affordable rate and quite easy to use. 7809 consists of only three terminals, i.e. input, output, and ground, they require no external components for electronics basic operation. 7809 regulators available within aluminuim TO-3 PAK package and and with several fixed output voltages.
Moreover, these regulator features internal current limiting, thermal shut-down, and safe operating area protection, making it essentially indestructible. Under the condition, if adequate heat sinking provided, they deliver over 1A output current. Although these IC basically designed as fixed voltage regulators, these devices often used with external components to provide adjustable voltages and currents. Three-terminal voltage regulators have three terminals namely input as unregulated (Vin), regulated output (Vo) and customary or a ground terminal. These regulators eliminate the need for any feedback connections. Current limiting feature limit the peak output current to a safe value. Whereas the Safe area protection for the output transistor ensured to limit internal power dissipation. In case, if internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating.
LM78XX series are quite easy to use and reduce the number of external components. It is not compulsory to bypass the output, although this does improve transient response. Input bypassing required only if the regulator located apart from the filter capacitor of the power supply.

Related products
1/4W 5% Assorted Value Carbon Film Resistor Assortment Kit Set pack electronic diy kit
- 100% brand new and high quality.
- Fine workmanship and long service life.
- 1/4W carbon film resistor package.
- High precision and stability.
- Easy to use.
- Precision: 5%
- Error: 5%
- Values
- 10Ω, 15Ω, 22Ω, 33Ω, 47Ω, 68Ω, 100Ω, 220Ω, 330Ω, 470Ω, 1k, 1k5, 2k2, 3k3, 4k7, 5k6, 6K8, 8K2, 10K, 15K, 22K, 33K, 47K, 56K, 68K, 100K, 150K, 220K, 330K, 470K
- Package included: 150pcs
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
4 Pin RMC Connector
5 Pin RMC Connector
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃

Reviews
There are no reviews yet.