I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%
TNY177PN Off-line Switcher IC
Original price was: ₹75.00.₹65.00Current price is: ₹65.00. inc. GST
CD4066 Quad Single-Pole Single-Throw Analog Switch IC
Original price was: ₹25.00.₹15.00Current price is: ₹15.00. inc. GST
A6259 Fly Back Switching Regulator IC
Original price was: ₹100.00.₹90.00Current price is: ₹90.00. inc. GST
- Universal-Input 13 W 100 kHz Fly back Switching Regulator
- 100 kHz PWM with ±5% frequency jittering for EMI noise filtering cost reduction
- Rugged 650 V avalanche-rated MOSFET:
-Simplified surge absorption
-No VDSS derating required
- Low RDS(on) : 6 Ω maximum
- Auto-burst mode for stand-by operation or light loads; less transformer audible noise
- Built-in leading edge blanking
- Soft start and low start-up current; start-up circuit disabled in operation
- Auto-burst stand-by (intermittent operation) input power <0.1 W at no load
- Built-in constant-voltage/constant current (CV/CC)
- Multiple protections:
–Â pulse-by-pulse overcurrent protection (OCP)
–Â Overload protection (OLP) with auto restart
– Latching overvoltage protection (OVP)
-Under voltage lockout (UVLO) with hysteresis
– Latching thermal shutdown (TSD)
- Operation Start Voltage 15.7V
- Startup Current 1.43mA
Description
The STR-A6259H designed as 100 kHz PWM topology (with ±5% frequency jittering for minimum EMI) regulator designed explicitly to satisfy the requirements for increased integration and reliability Package DIP-8 in flyback converters. This switching regulator IC consists of primary control and drive circuit with an avalanche-rated power MOSFET. This regulator IC covers a power range from below 17 watts for an Approximate Scale 1:1 230 VAC input. Or to 13 watts for a universal (85 to 264 VAC) input. Moreover, this device offers a wide range of applications, from DVD players and VCR player/recorders to ac adapters for cellular phones and digital cameras.
Meanwhile, an auto-burst standby function reduces power consumption at light load, while multiple protections, including the avalanche-energy guaranteed MOSFET. As a result, provide high reliability of system design. Moreover, this regulator IC features cycle-by-cycle current limiting, under-voltage lockout with hysteresis. And also overvoltage protection, and thermal shutdown to protect the power supply during the normal overload and fault conditions. This Overvoltage protection and thermal shutdown are latched after a short delay. The latch resets by cycling the input supply.
In addition to it, the Low start-up current and a low-power standby mode selected from the secondary circuit complete a comprehensive suite of features. A6259 Fly Back Switching Regulator IC manufactured in a 8-pin mini-DIP plastic package with pin 6 removed. The lead frame plating is pure Sb, and the package complies with RoHS.
Reviews (0)
Shipping & Delivery
Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.