I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-5%Sold out
Wire Stripper Flat Nose Cable Cutter with Practical Punch Down Tool
Original price was: ₹110.00.₹100.00Current price is: ₹100.00. inc. GST
XT90 Male-Female connector pair with Housing
Original price was: ₹375.00.₹350.00Current price is: ₹350.00. inc. GST
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Original price was: ₹475.00.₹450.00Current price is: ₹450.00. inc. GST
- Frequency Range: DC-6GHz
- Impedance: 50Ω
- VSWR: 1.5 Max
- Insertion Loss: 1.8db
- Insulation Resistance: ≧5000MΩ
- Power Handing: 2W(cw)
- Working Temperature: -40°C to +85°CSize: 1.9 inches
- Color: Gray
- Material: brass connector
- Conductor Material: brass connector
- Length: 1.9 inche
Out of stock
Description
SMA Pigtail Cable to Ufl Extension Cable 1.13 Cable designed explicitly for mobile phone, antenna, WLAN applications. This is a SMA Bulkhead Female to IPX Ulf Female RF Coaxial Connector Pigtail Cable. It function as a IPX UFL Terminal Block Connector for a mini PCI card. It can be operated in a wide range of application including Mobile phones, Antenna, WLAN. And also Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, and electronic measuring instrument. SMA Pigtail Cable comes in a cable length of 1.9 inches with a WIFI Antenna Extension Pigtail Jumper Cable SMA to IPX. This SMA Pigtail Cable to Ufl Extension Cable opeates at a frequency range of DC 6GHz at an impedance rate of  50Ω. Meanwhile, it provides a VSWR of 1.5max with an insertion loss of 1.8db.
Reviews (0)
Shipping & Delivery
Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.