“AP Extension pigtail SMA female socket jack to UFL IPX Connector” has been added to your cart. View cart

-13%

Click to enlarge

ATMEGA128A Atmel Microcontroller IC

Original price was: ₹400.00.Current price is: ₹350.00. inc. GST

Flash (Kbytes): 128 Kbytes
Pin Count: 64
Operating Freq. (MHz): 16 MHz
CPU: 8-bit AVR
Max I/O Pins: 53
Ext Interrupts: 8
SPI: 1
UART: 2
ADC channels: 8
SRAM (Kbytes): 4
EEPROM (Bytes): 4096
Operating Voltage (Vcc): 2.7 to 5.5V
High-performance, Low-power Atmel AVR 8-bit Microcontroller
Advanced RISC Architecture – 133 Powerful Instructions – Most Single-clock Cycle Execution – 32 × 8 General Purpose Working Registers + Peripheral Control Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle Multiplier
High Endurance Non-volatile Memory segments – 128Kbytes of In-System Self-programmable Flash program memory – 4Kbytes EEPROM – 4Kbytes Internal SRAM – Write/Erase cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85°C/100 years at 25°C(1) – Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation – Up to 64 Kbytes Optional External Memory Space – Programming Lock for Software Security – SPI Interface for In-System Programming
JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support Atmel-8151J-8-bit AVR Microcontroller_Datasheet_Complete-09/2015 – Programming of Flash, EEPROM, Fuses and Lock Bits through the JTAG Interface

Add to wishlist

Categories: Electronic Components & Hardwares, electronic-components-hardwares-components, Integrated Circuits (IC) Tags: ATMEGA128A, ATMEGA128A Atmel Microcontroller IC, Atmel’, Microcontroller IC

Description

The ATmega128A designed as a effectively low-power, high-performance CMOS 8-bit microcontroller. It comes with 128K bytes of in-system programmable non-volatile storage manufactured using Atmel’s high-density non-volatile memory technology. Meanwhile, it is compatible with the industry-standard 80C51 instruction set and pinout. The on-chip ISP Flash on the chip permits the program memory to reprogrammed through SPI interface in-system by a standard non-volatile memory programmer. Or via an On-chip Boot program running on the AVR core.

In this Atmel microcontroller, by combining a flexible 8-bit CPU with in-system programmable Flash on a monolithic chip, Atmel ATMEGA128A becomes effectively powerful microcontroller. In order that it delivers a highly flexible and affordable solution to various embedded control applications. Moreover, the Atmel ATMEGA128A features 128Kbytes of In-System Programmable Flash with Read- While-Write capabilities, 4Kbytes EEPROM, 4Kbytes SRAM, 53 general purpose I/O lines, 32 general purpose working registers. And also equipped with Real Time Counter (RTC), four flexible Timer/Counters with compare modes and PWM, 2 USARTs. This Atmel microcontroller comes with one byte-oriented Two-wire Serial Interface, an 8-channel, 10-bit ADC with optional differential input stage with programmable gain, programmable Watchdog Timer with Internal Oscillator, one SPI serial port.

The Idle Mode stops functioning of CPU allowing the RAM, timer/counters, serial port, and interrupt system to continue their operation. Whereas, the Power-down mode saves the RAM contents but freezes the oscillator. Thereby disabling all other chip functions until the next external interrupt or hardware reset. These two features makes it suitable for battery operated applications. Whereas in Power-save mode, the asynchronous timer continues to run. Thus allowing the user to maintain a timer base while rest of device is sleeping.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ATMEGA128A Atmel Microcontroller IC”

Shipping & Delivery

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.