I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-12%
3.7V 950mAh Battery
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
74LS89 Integrated Circuit
Original price was: ₹200.00.₹150.00Current price is: ₹150.00. inc. GST
BAKU 1501T Regulated DC Power Supply
Original price was: ₹2,500.00.₹2,200.00Current price is: ₹2,200.00. inc. GST
Related products
DC-DC BOOST CONVERTER STEP UP I/P: 10V – 32V O/P: 12V -35V/6A
- Input voltage: 10V-32V DC
- Output voltage: 12V-35V DC
- Output Current: 6A
- Output ripple: 2% MAX
- Output power: 150 W
- Working temperature: -40 degree to 85 degree
- No load current:25mA
- Voltage regulation:+-0.5%
- Load regulation:+-0.5%
- Dynamic response speed: 200uS 5%
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals
- Dimension:2 .60*1.85*1.1inch
LM 2576HV Buck Module
- Module Properties: non-isolated constant voltage module
- Rectification: non-synchronous rectification
- Input voltage: 4.5V-60V
- Output Voltage(Less than input): 1.3V-26V
- Continuous operating current: 1.2A (output total power within 20W)
- Output current: 3A maximum
- Conversion efficiency: 92% (maximum)
- Switching frequency: 52KHz
- Output ripple: 50mV (maximum) 20M-bandwidth
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ℃ to +85 ℃
- Size: 43 * 30 * 14 mm
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
LM317 DC-DC STEP DOWN CONVERTOR
- Output current: 1.5A(min), 2.2A(typical)
- I/O voltage differential (v1-v0): 40V DC
- Adjustable output voltage range: 1.2V-37V
- Voltage input: 4.2V-40V
- Switching frequency: 100 MHz
- 80 db ripple rejection
- Input method: VIN input is positive, GND input negative
- Output method: VOUT output positive, GND output negative
- Operating temperature: 0 degrees to 125 degree Celsius
- Dimension: 35.6*16.8mm
Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE
- MPS MP2307DN buck regulator IC
- Design Non-isolated buck
- Rectification: synchronous rectification
- Input voltage: 4.75V-23V
- Output voltage: 1.0V-17V
- Output current Peak: 3A, continuous 1.8A
- Conversion efficiency: 96%
- Switching frequency: 340KHz
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no load)
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ° C to + 85 ° C
- Dimensions: 17 * 11 * 3.8mm
QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
YHDC SCT013-000 100A SWITCHING TYPE CURRENT TRANSFORMER
- Non-invasive current transformer
- Input current: 100A
- Frequency: 50Hz-150KHz
- Core material: Ferrite
- External material: ABS
- Suitable for lighting equipment, current measurement, AC motors, air compressors, and protection
- Two forms of output current
- Dielectric strength 6000V AC/1min
- Mechanical strength: not less than 100 times during opening and closing
- UL94-V0 flame retardant property
- Non linearity +-3% (10%-120% rated input current)
- Output plug: 3.5mm
- Working temperature: -25 degree TO 70 degree Celsius
- Dimension: 60*30*20mm
Reviews
There are no reviews yet.