I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-33%
Taparia 3" Nose Plier
₹200.00 ₹160.00 inc. GST
Fluke Digital Multimeter 101
₹5,000.00 ₹4,500.00 inc. GST
Bluetooth Receiver With Amplifier Board
₹300.00 ₹200.00 inc. GST
Related products
TPA3118 PBTL digital amplifier board 1X60W 12V 24V Mono AMP
TDA7492 50W*2 100W High Power Digital Amplifier Board
• Class D amplifier produces 2 x 50 watt @ 8 ohms
• Can be wired R+ to L+ for mono mode
• 8″ stereo wiring harness included
• Short-circuit and over-temperature protection
• Supply Voltage 10-26 V DC.
• Standby and mute features
• Short-circuit protection
• Thermal overload protection
• Externally synchronizable
LM386 LOW VOLTAGE AUDIO POWER AMPLIFIER
- Supply Voltage: 4-15V
- Analog input voltage 0.4V (maximum)
- Quiescent Power: 24mW @ 6V
- Voltage Gain: 20 to 200 (26dB to 46dB)
- PSRR: 50dB
- Speaker impedance: 4Ω
- On board power indicator
- On board speaker wiring block
- On board 10k variable resistor, for volume adjustment
- 200 multiplier benefit circuit design
- Available in 8-Pin PDIP,SOIC and VSSOP packages
- Used in AM & FM radio amplifiers, music players, power amplifiers etc.
TDA7266 Dual Audio Channel 7W + 7W Amplifier Module
- Operating Voltage Range: 3 V to 18 V
- Power supply:14W
- On-board TDA7266 stereo audio amplifier chip
- Output: dual-channel 7W + 7W
- On-board 5.08 mm terminal blocks for the left and right audio channels
- On-board potentiometer for volume adjustment
- DC power jack
- Minimum external components
- On board TDA7266 audio power amplifier chip, double track 7W + 7W, suitable for 4-8 Euro, 5-15W speakers.
- The main pin has led chip, convenient external device control, onboard 2 road 5.08 (mm) distance between two p terminal, around a track connection output respectively.
- The on-board dial potentiometer, output size can adjust the volume.
- Support in DC, terminal blocks, row needles 3 power input mode, the default for the DC,
- Standby and mute functions
- Short-circuit protection
- Thermal overload protection
- Dimension:45mm * 33mm * 30mm
- Weight:7g
Digital TPA3116D2 2.1 HIFI Subwoofer Amplifier Board 50w+50w+100w Beyond
- Most Perfect 2.1 digital amplifier board.
- 8.20 latest upgrated version
- Gain promoted to 36DB,
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Good sound quality, high efficient device and power amplifying feature.
- 50W x 2+100W 1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
- Just connect the power supply and loudspeaker box, enjoy pure digital music. Adopts two high-quality TPA3116D2 digital amplifier chips.
- Left and right channel output 50WX2, subwoofer output 100W, efficiency can reach above 90%,
CA-3110 Dual Channel Stereo Class Amplifier Board
PAM8406 Digital Amplifier Board 5W×2 Volume Adjustable D class module
- Working voltage:3.5 - 5V, limit operating voltage 5.5V
- Excellent noise suppression can hear any noise without connecting input audio
- Dual-channel stereo, 5v power supply is needed that can input 5w+5w power, to drive 4, 8 little speaker directly
- Volume adjustment of the right and left channel
- The unique non-LC filter Class-D digital power board used computer USB to charge.
- Dual-panel wiring solves the ground potential balance and avoids the crosstalk between channels caused by wiring
- Super miniature design
- Used machine to weld whole plate.
- Weight: 15 grams.
Red – 2 Channel 3W Digital Power PAM8403 Class D Audio Amplifier Board USB 5V
- Input Voltage: 2.5-5.5 V (USB power supply).
- Output Impedance: 4 ohm.
- Efficiency: 90%.
- Frequency Response: 150 Hz – 20 KHz.
- Input Impedance: 2 K ohm.
- A class D-type amplifier without a filter, low quiescent current, and low EMI.
- Good noise suppression.
- Input audio should be via sheilded wire.
- Dual channel stereo output 3 w + 3 w power.
- Works with 5v power supply.
- Can directly drive 4 /8 Ohm small speakers.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protectioN, thermal protection.
- Dimensions: 15 x 20 mm.
Reviews
There are no reviews yet.