I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Delta Chrome II DIN Rail Power Supply (DRC Series)
| Model | Output Voltage | Output Power / Current | Input Voltage | Other specs |
|---|---|---|---|---|
| DRC-24V030W1RZ | 24 V | 30 W (≈1.5 A) RS Components+1 | 85-264 V AC | DIN-rail, class II |
| DRC-24V100W1RZ | 24 V | ~100 W (3.83 A) DeltaPSU+1 | 85-264 V AC | compact size |
| DRC-24V100W1AZ | 24 V | 91.2 W (3.8 A) DeltaPSU | 90-264 V AC | 91 × 89.9 × 55.6 mm size |
| Others: 15 W model, 12 V output, 48 V output variants. |
Description
Key Features & Highlights
-
Class II, double-isolation design: No earth/PE connection required (thus simplifies installation in cabinets) Mouser Electronics+2Mouser Electronics+2
-
Universal AC input: 85 V AC to 264 V AC (so works with Indian mains) Mouser Electronics+2DeltaPSU+2
-
Compact size built to the DIN 43880 form factor (so fits standard DIN rail enclosures/distribution boards) Mouser Electronics+1
-
High efficiency, compliant with DOE VI energy efficiency level and low no-load power consumption. Mouser Electronics
-
Certified for NEC Class 2 / Limited Power Source (LPS) and Over Voltage Category (OVC) III – relevant in industrial/building-automation contexts. Mouser Electronics+1
-
Wide range of outputs: The DRC series includes 15 W, 30 W, 60 W, 100 W models; output voltages of 5 V, 12 V, 24 V, 48 V in different variants
- https://www.mathaelectronics.com/
Reviews (0)
Shipping & Delivery
Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.