I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Generator Motor Big
₹150.00 Original price was: ₹150.00.₹90.00Current price is: ₹90.00. inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are all converted using motor–generator sets. They can also be used to disconnect electrical loads from the power source. Large motor–generators were commonly used to convert industrial volumes of electricity, while smaller motor–generators (like the one in the photo) were used to convert battery power to greater DC voltages.
Electrical loads are isolated from power supply lines using motor generators. It is made up of an electric generator that is powered by an electric motor. This is used to convert the frequency, voltage, and phase of electrical power. Unlike a traditional electrical generator, it is powered by a stream turbine or internal combustion engine.
They are also used to:
- Isolate electrical loads from the electrical power supply line
- Eliminate spikes and variations in large power supplies
- Provide phase matching between different electrical systems
Smaller motor-generators have been used to convert battery power to greater DC voltages, while larger motor-generators have been used to convert industrial volumes of electricity.

Related products
28BYJ-48 5V Stepper motor
- High-quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage : 5VDC
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625° /64
- Frequency : 100Hz
- DC resistance : 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque >34.3mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10MΩ(500V)
- Insulated electricity power :600VAC/1mA/1s
- Insulation grade :A
- Rise in Temperature <40K(120Hz
- Noise <35dB(120Hz,No load,10cm)
49TYD-500 Synchronous 5 RPM AC220/240V AC Motor
500 RPM CS Gear Motor
Bo Motor Double Shaft 150RPM
- RPM: 150
- Operating Voltage : 3V - 9V
- Gear materials: plastic.
- Motor types: permanent-magnet.
- Brush-type: Brush.
- Uncommitted motors: Homopolar motors.
- Magnet types: ferrite magnets.
- Torque: Approximate 2.5Kg/cm.
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with trend to greater use of plastic housings and other components.
DC Toy Motor
Metal Gear Servo Motor GS-5515MG
- Control System: Positive PWM control (1500 usec neutral)
- Operation Voltage Range: 4.8V - 0V
- Operation Temperature Range: -20 C - +60 degree C
- Test Voltage:
- Standing Torque@ 4.8V: 13kg-cm
- Speed@ 4.8V : 0.31 sec / 60 at no load
- Idle Current@ 4.8V: 250mA at stopped
- Running Current@ 4.8V: 2000mA at no load
- Standing Torque@ 6.0V: 15kg-cm
- Speed@ 6.0V: 0.28 sec / 60 at no load
- Idle Current@ 6.0V: 300mA at stopped
- Running Current@ 6.0V: 2200mA at no load
- Dead Band Width: 8 usec
- Circle: 10000 times
- Direction: Re-clock wise/ pulse travel 1500 to 1900 usec
- Drive type: FET drive
- Motor Type: Carbon brush
- Size: 41.2*20.2*37.7 mm
- Weight: 63g without splined horn
- Ball Bearing: Double ball bearing
- Gear Material: Metal gear
- Case Material: Nylon plus fiber
- Connector Wire Length: 300mm
- Connector Wire Gauge: 22AWG heavy duty (Futaba universal)
Mini Disc Vibrating Motor
Vibrator Motor Button Type
- Rated voltage: 3.0VDC
- Maximum Working Voltage Limits: 2.5-4.0VDC
- Rated load: eccentric hammer
- Rated speed: 12000+/-2500RPM
- Rated current: 70mA Max
- Stall current: 120mA Max
- Insulation resistance: 10M ohms Min
- Terminal resistance: 30 ohms
- Small size makes it easy to mount in or on your project
- Low noise level enables feedback without unwanted distractions
- Rotates both CW and CCW for ease of use and installation

Reviews
There are no reviews yet.