I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Generic Portable MT87 Digital Multimeter LCD Clamp AC DC Voltage Current Amp Ohm Tester
₹600.00 Original price was: ₹600.00.₹550.00Current price is: ₹550.00. inc. GST
• Function Range: Accuracy
• DC voltage: 600V±0.8%+1dgt
• AC voltage: 450V±1.0%+4dgts
• Resistance: 200KΩ±1.0%
• AC Current: 20A-200A-400A±2.0%+5dgts
• Power supply: 1.5V 2x AAA batteries (not included)
• Max display: 1999
• Buzzer: Yes
• Diode test: Yes
• Data hold: Yes
• Dimension: 150L×63W×28H(mm)
• Display size: 14mm×47mm
• Color: black+yellow
• Material: plastic+electronic part
This is Generic Portable MT87 Digital Multimeter LCD Clamp AC DC Voltage Current Amp Ohm Tester. MT87 digital multimeter comes with a unique feature of Measuring precision AC/DC current up to 400A and DC/AC voltage up to 600V.This compact sized light weight designs enables the multimeter Safety design with no exposed parts, shielded banana part and recessed terminals.
This device comes with a 3 1/2 LCD display providing life display of the digital values. The multimeter can read values upto 1999. Moreover, it features buzzer off and diode test function, along with low battery indicator features. The pocket size designe allows easy handling of the multimeter. This generic potable MT87 digital multimeter offers high accuracy operating at a DC voltage range of 600V±0.8%+1dgt and AC voltage of 450V±1.0%+4dgts. And also it comes with a Resistance of 200KΩ±1.0%. A 1.5V 2x AAA batteries which is not included in the device is used for the functioniing of the digital multimeter.
This portable device are widely used in measurement of
• DC voltage Current check
• AC voltage Current check
• Important Safety Information
• Diode check
• Continuity Test
• DC , AC Amp check
• Ohm check
• And other option

Related products
1.8″ TFT DISPLAY FOR ARDUINO
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
- 18-bit (262,144) colour
- 4 or 5 wire SPI digital interface
- Built-in microSD slot – uses 2 more digital lines5V compatible!
- Use with 3.3V or 5V logic
- On-board 3.3V @ 150mA LDO regulator
- 2 white LED backlight, a transistor connected so you can PWM dim the backlight
- 1×10 header for easy breadboarding
- 4 x 0.9″/2mm mounting holes in corners
- Overall dimensions: 34 x 56 x 6.5mm
- Current draw is based on LED backlight usage: with full backlight draw is ~50mA
128*64 GREEN (LCD DISPLAY MODULE)
3.5” TFT for Raspberry Pi
- Operating Voltage: DC 5V.
- Touch Screen Controller: XPT2046
- Resistive touch.
- Dimension: 3.5 inch
- Resolution: 320×480 pixel
- Colors:65536
- Backlight: LED
- LCD Type: TFT
- LCD Interface: SPI
- Compatible with any version of the raspberry pie
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
- Size perfectly fits the Pi
- High-quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system, kali Linux system
- Support software keyboard (system interaction without keyboard/mouse)
- Dimension: 10 x 8 x 4 cm
- Weight: 150 Grams
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
5.5mm 6 LED Android PC Endoscope Waterproof Inspection Borescope Camera 5M
- Lens Diameter: 5.5mm
- Pixel: 0.3 megapixels
- Resolution: 640*480
- sensor size: 1/9 inch
- Frame Rate: 30fps
- View Angle: 67 degree
- Focal Distance: 3cm-8cm
- Capture resolution: Up to 1024 x 720(vga),
- Photo format: jpeg
- Video Format: AVI
- Waterproof level: IP67
- Optional Power Supply : 5V DC Via OTG USB Port
- 5mm Len with 6pcs adjustable LED lights
- Micro USB Cable Length: 5M
- operating temperature: 0 degrees to 70 degree
- Compatible with USB 2. 0. or 1. 1
- Support Windows2000 or Windows xp or vista or Windows7 or Windows8
- Support android phone has OTG and UVC function after install "CameraFi" app from google store, such as Samsung Galaxy S4 S5 S6, Note 2, Note 3, Note 4, Note 5 ,HTC M9 ,M9+,M8,LG G4 etc.
- Dimension: Approx. 13.5*13.5*3cm
- Weight: 52g
AC 80- 300V LCD Digital Voltmeter Eu Plug Electric Pen Meters
- Model: DM55 1
- Colour: White
- Material: ABS
- Measuring Accuracy: ±1.5%, ±2 digit
- Number of Digits: 3 Digits
- LCD size: 3.6 * 1.8cm
- LCD Display Colour: Blue
- Suitable for measuring the AC voltage in many places, such as offices, factories, laboratories, households and so on
- A plug-in digital voltmeter is widely used in AC 80-300V detection
- Digit Measuring Range: AC 80 300v
- Consume Power: <1w (about every 1200hours consume 1 kilowatt hour)
- Plug Style: Eu
- Dimension: 53 * 38 * 60mm
- Weight: 37g
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.

Reviews
There are no reviews yet.