I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-27%
1.8" TFT DISPLAY FOR ARDUINO
₹950.00 inc. GST
RP203 Thermal printer with case 5V
Original price was: ₹2,900.00.₹2,300.00Current price is: ₹2,300.00. inc. GST
Heatsink for Raspberry pi 4
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. inc. GST
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
- Self-adhesive thermal layer for easy application
- The thermal resistance of 27°C/W
- Dimensions(LxWxH) mm:
-14 x 14 x 6
-14 x 9 x 4
-9 x 9 x 4
-7 x 7 x 6
- Material: Aluminium
- Colour: Silver
- Weight: 3g for a set of 3 Heat Sink
Description
Raspberry Pi 4 Heat Sink Set is a low-cost heat sink built specifically for the Raspberry Pi 4B model. These high-quality Raspberry Pi heatsink kits are the right option whether you’re overclocking your Pi, running it in a hot location, or simply want your Pi to look great. It can help extend the life of the Raspberry Pi’s SoC and LAN chip by lowering their operation temperature. At the very least, heat sinks are fitted on the Raspberry Pi’s two essential components: the CPU and the LAN Chip. Some packages additionally include a heat sink for the Raspberry Pi’s back. In the official casing of the Pi 4, a heatsink is usually added. It is used to avoid throttling the CPU (and likely other components, as they all get very hot).
These heat sinks are comprised of high-quality copper and aluminium with a thermal adhesive coating. Make sure your gadget doesn’t become too hot. These finest alloys provide sticky thermal tape for excellent thermal transfer to the heat sink, delivering extra cooling to the IC for the maximum heat dissipation. These heat sinks are intended to fit inside common microcontroller boxes. Furthermore, these heat sinks are utilised to cool CPUs, regulators, and other components in other devices like as the BeagleBone.
Why Heat Sink?
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
Reviews (0)
Shipping & Delivery
Related products
1/4 CMOS 640*480 USB Camera with Collapsible cable for Raspberry Pi
• Interface: USB 2.0
• Sensor: 1/4 Cmos
• Operating Current: <120 mA
• Picture Format: VGA
• Resolution: 640X480
• Supports 300k pixels, a maximum resolution of 640×480, and VGA/ YUY2 packed formats
• Dimension: 40mm × 15mm × 30mm; designed for Raspberry Pi and PC
• With a retractable USB cable, convenient to store
• Applies USB 2.0 High-speed Sensor, plug-and-play, no driver installation
• High definition and true colour images.
• max pixels: 12m pixels
Raspberry Pi 3-MODB+-1GB Motherboard
- 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM
- 802.11n wireless LAN, 10/100Mbps LAN speed, Upgraded switched Micro USB power source up to 2.5A
- Bluetooth 4.1, Bluetooth low energy
- 4 USB ports, 40 GPIO pins, full HDMI port, combined 3.5mm audio jack, and composite video
- Camera interface (CSI), Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), Video Core IV 3D graphics core
- Warranty Details: 1-year warranty provided by the manufacturer from date of purchase
Raspberry Pi 4 (2GB)
- 2GB/4GB Varients
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C
- Port Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- 265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient
Waveshare 7 inch Capacitive Touch Screen LCD 1024×600 HDMI interface
- 7-inch IPS screen with a hardware resolution of 1024×600.
- 5-points capacitive touch control.
- Support backlight control, more power saving.
- Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, Banana Pi, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
- Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- 5mm audio jack, speaker connector, supports HDMI audio output
- Also supports VGA input(specific cable is required and should be purchased separately)
- Dimension: 20 x 14 x 5 cm
- Weight: 400 Grams
Reviews
There are no reviews yet.