I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
HLK-SW16 16 CHANNEL WIFI CONTROLLED RELAY BOARD
₹5,100.00 Original price was: ₹5,100.00.₹5,050.00Current price is: ₹5,050.00. inc. GST
- Supply voltage: DC 5V
- Current supply: 2 ampere
- Wi-Fi module: HLK-RM04
- 16 channel device
- Antenna: 2.4G flexible antenna
- Low power Wi-Fi module
- Support 802.11b/g/n protocol
- Support AP/STA
- Support TCP server/ TCP client/ UDP server/ UDP client work mode
- Doesn’t need any driver, use as the normal serial port of PC
- Support wireless security WEP/WPA-PSK/ WPA2-PSK/TKIP/AES
- Dimension: 115*130*19mm
Available on backorder
HLK- SW16 16 channel WIFI controlled relay board is a highly professional device, developed by the HI-LINK electronics co ltd, which can implement TCP connection through the gateway and can establish a connection with remote devices. In this, the network client and the equipment connect directly without modifying the communication protocol and thus saving the development cycle. This module ensures a highly incomparable superiority function when compared to other modules, avoiding the use of the user to apply for a dynamic domain name, frequency operation, such as the port mapping on the router.in general, these are low-power WIFI modules with high reliability.
The HLK- SW16 module designed with an integrated component provides a fully integrated solution for applications. It supports the IEEE802.11 standard in the 2.4-2.5GHz ISM frequency band, including802.11b/g/n. And also the modules integrate all the RF components required, eliminating the need to perform expensive RF design and test. Simply connecting sensors and switches to the module IO pins or UART interface can design products. The modules with lower power 3.3V 100mA, only need 1 second start time. Moreover, this module Support TCP Server/TCP Client/UDP Server/UDP Client operation mode. At the same time, it Supports wireless security WEP/WPA-PSK/ WPA2-PSK/TKIP/AES also. Hence, this module allows designers to use in a wide range of applications in minimum time with significantly reduced development effort and cost.
APPLICATIONS:
- Wireless communication between two microcontrollers
- Communicate with Laptop, Desktops and mobile phones
- Data Logging application
- Consumer applications
- Wireless Robots
- Home Automation

Related products
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
E27 PIR Infrared Motion Sensor LED Light Lamp Holder Control Switch
ESP8266-12E 10A 220V NETWORK RELAY WIFI MODULE INPUT DC 7V-30V
- Input voltage: DC 7V-30V
- Relay voltage: 220V
- Relay current: 10A
- ISM: 2.4GHz
- PA: +25dBm
- Input over-voltage protection
- Input overcurrent protection
- ESP8266 WIFI module with 4 layered board design
- LED indicator for input status and output status
- 220V 10A relay, normally opened, and one normally closed
- Optocoupler isolation input, TVS input protection
- Access server control via HTTP protocol by TCP client mode, high current terminals
- Dimension: 65*40*18mm
Fan Wifi Controller
SI4432 WIRELESS MODULE
- Power supply: 1.8-3.6 V
- Maximum output power: 20dBm
- Data transfer rate:0.123-256kbps
- Frequency range: 433.92MHz
- Sensitivity up to 20dBm
- FSK, GFSK, and OOK modulation
- Ultra-low-consumption shutdown mode
- Digital received signal strength indication (RSSI)
- Waketime
- Automatic matching and two-way antenna switch control
- Configurable packet structure
- Preamble detection
- 64-byte send and receive data register (FIFO)
- Low power detection
- 8-bit ADC and temperature sensor
- Integrated voltage regulator
- Frequency hopping
- Operating Temperature:-20 degree +60 degrees Celsius
- Transmission Distance (Maximum):1000 meters
- Power-on reset function
- Built-in lens adjustment
- Dimension :19*19*1 mm
- Weight :0.9 g
SWIVEL INFRARED MOTION SENSOR OCCUPANCY SWITCH
- Power frequency: 50~60Hz
- Control light: <3 LUX ~ 2000 Lux (Adjustable)
- Time-Delay: Minimum:8sec±3sec to a Maximum:7min±2min
- Power source: 100V/AC-130V/AC <=> 220V/AC-240V/AC
- 1200W(220V/AC-240V/AC) - 800W(100V/AC-130V/AC)
- Power consumption:0.45W(static 0.1W)
- Detection range: 180°
- Detection distance: 12 meters maximum at less than 24°C
- Working temperature:-20 to 40°C
- Working humidity: Less than 93% Relative Humidity
- Suggested Installation height: 0.5 meter to 3.5 meters
- Detection motion speed: 0.6 to 1.5 meters per second
- Identify day and night automatically -
- Power and detection indication
- Time-delay added continually
- Time-delay adjustment according to the customer desire. The minimum time is 8sec±3sec and the maximum is 7min±2min.
- Locking function: the sensor will keep load lighting when power is shut off for 2 seconds and then on. When power is shut off for 4 seconds and then on, sensor will resume automation.

Reviews
There are no reviews yet.