I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
IIC/I2C Serial LCD Adaptor module
IIC / I²C serial LCD adapter module for 16×2 and 20×4 LCDs—reduces wiring to two pins and supports Arduino and ESP32.
Description
The IIC / I²C Serial LCD Adapter Module is a convenient interface board that allows standard HD44780-based character LCDs (16×2, 20×4, etc.) to communicate using the I²C protocol. By converting parallel LCD signals into a simple two-wire interface, this module significantly reduces the number of GPIO pins required.
Using only SDA and SCL lines, the adapter makes LCD integration fast and clean, especially for projects with limited I/O pins. It typically features an onboard PCF8574 I²C I/O expander, adjustable contrast potentiometer, and backlight control jumper.
The module is fully compatible with Arduino, ESP32, ESP8266, Raspberry Pi, STM32, and other microcontroller platforms, making it ideal for displaying sensor data, menus, system status, and messages in embedded and IoT applications.
Reviews (0)
Shipping & Delivery
Related products
58mm Thermal Printer (Black)
- Heavy-duty 58mm direct thermal printer
- Inbuilt Adapter
- High speed printing of 90mm / Sec
- Free Drivers, USB, Adapter and Paper Roll
- Interface: usb + cash drawer support.
- Works with windows 7 / 8 /10
- High speed printing
- Long life thermal head.
- Perfect print quality
- Low cost,Low noise, fast speed print.
- Support cashbox drive.
- Compact and lightweight,beautiful design.
- Â Built in data bumper (data received when printing).
- Interface type parallel port or serial port.
- Support to enlarge characters and adjust characters spacing for printing.
- Compatible with esc/order pos.
- Operation temperature0~50 Degree C
- Relative humidity10~80%
- Item size 12.8 * 18 * 10.8cm
ESP8266 WIFI Industrial stable version A full test board cloud function test Black board T5
- Â Support 802.11b / n / g wireless standard
- Independent development MCU platform
- High cost performance
- Support UART / GPIO data communication interface
- Support STA / AP / STA + AP coexistence mode of operation
- Support SmartLink intelligent networking (APP)
- Support wireless upgrade firmware
- Support WPS network configuration
- Built-in onboard antenna &Temperature and humidity sensor
- RGB three-color light adjustable
- Provide rich AT command set configuration
- Free AiCloud cloud service for debugging
- 3 AA batteries / 5V adapter power supply
- Size: 61.6mm x 56.2mm;
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Text to Speech TTL Module (Serial to Speech)
-  Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Â Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
 Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
 Voice effect optimization
-
 Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
Reviews
There are no reviews yet.