I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Light Head Magnifying Glass
₹1,300.00 Original price was: ₹1,300.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
- The product is a wide-view magnifying glass with a light head and a 3D lens.
- The headband is adjustable to fit most head sizes.
- Magnifier: 1.2X-520620mm; 1.8X-230320mm; 2.5X-150250mm; 3.5X-80120mm
- Equipped with a single strong LED light to enlighten the viewing field
- Battery power: 2 x 1.5V AAA batteries (not included)
Light travels at different speeds through different substances. It goes slightly slower through glass and plastic than it does through air.
A magnifying glass is usually made of glass or plastic and has a convex lens (one that bulges outwards). When light strikes the glass at an angle, it is refracted towards the lens’s center. Leaving the glass causes it to refract, even more, implying that these streams of light will eventually converge. These are unique in that they have two lens slots and one fixed front round lens (8X). The two back lens slots can hold one or two lenses at a time.
Since all of the lenses on the headlamp can be folded when not in use, you can utilise any one of them or any combination of the three (1 fixed lens and 2 replace). It also consists of a soft, breathable sponge-padded headband with two rotational knobs on the left and right that revolve anticlockwise to remove the entire lighting frame from the headband, making it more comfortable to wear. This magnifying working lamp, which comes in a variety of magnifications, aids in the improvement of low vision and allows for good sight even when stitching.
Applications:
- Outdoor activities, residential use, and electronic industry processing, installation, and repair;
- Examining pores, manicures, and so on.
- Sculpture and visual arts
- Camera, watch, and other repair accessories
- Reading in low-light conditions
- Dentists, tailors, and embroiderers
- Stamp collecting, jewelry making, printing, drawing, reading, stitching, and so on.

Related products
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
30mm-120mm Adjustable Circle Cutter Metal Wood Circle Hole Saw Drill Bit Cutter
- Material: Alloy Steel
- Shape: Air Plane
- Adjustment Range: 30mm-120mm
- Total Length: 16cm/6.30" (Approx.)
- Heavy-duty woodworking construction with longest tool life
- Multi-functions, Very convenient and affordable.
- Having adjustable two sharp blades on both sides of the measure-bars.
- Adjustable Plane type design.
- Adjustable Capacity 30mm - 120mm
- Comes with Set of Cutter + Blades + Centre Drills
- Comes with Hex Key and Center Drill Bit
- 2 Changeable Centre bits for thinner or thicker materials freely.
- Used to cut many kinds of materials, such as Plywood, Hardwood, Laminates, Composite, Rubber, Plastic, etc
Chrome Steel Extended 1 or 4 Inch Hex Shank Quick Change Adapter Bit Drill Chuck
- Material: Chrome Vanadium steel
- Shank Type: Hex Shank
- Diameter: 6. 35mm(1/4)
- Length: 60mm.
- Can be used for prolonging different kinds of screwdrivers.
- Built-in magnetic, fast, fastening, greatly improve work efficiency.
- Suitable for electric drill, screwdriver, wind batch transfer using to play the role of releasing bit holder.
- The interface comes with a locking function
- Extension rod can only be fitted with a single-ended mouthpiece, but not a double-ended mouthpiece.
- Dimension: 60mm
- Weight: 0.025kg
Diamond Coated Core Hole Saw Drill Bit Tools for Tiles Marble Glass (5mm 6mm 8mm 10mm 12mm) – Set of 5
- Type: Core drill bit.
- Material: Nickel Plated
- Coating: Diamond
- Diy supplies: Electrical
- Perfect for Cutting Accurate Holes in Glass And Ceramics.
- Heavy-duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.
- Sizes: 5/32", 1/4", 5/16", 3/8", 1/2"(5mm 6mm 8mm 10mm 12mm)
HSS DRILL BIT SET
Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display – Red
- Measurement range: 4.7V to 30V DC
- Only 2 wires, derives supply from the source
- Operation current: < 30mA
- Display colour: RED
- Measurement Error tolerance: +/- 2 percent
- Distance between mounting holes: 26mm
- Current Consumption: < 15 mA.
- Accuracy: 0.1 V.
- Wire length: 18cm.
- Refresh Speed : Approx. 200mS/time.
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 30mm x 12mm x 8.5mm
Triangular Shank HSS Step Cone Drill Titanium Bit Hole Cutter 1 or 4 1 3 or 8 Inch
- Material: High-Speed Steel Hss Steel.
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- The self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for centre punching or pilot hole drilling.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible
- Applicable scope: woodworking punch
- Size: 1/4 1 3/8 (1/3/1/5/3/7/1 1/1 1/1 3/8)
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Rated Current: 10 Amp Max.
- Measurement Input: NTC10K
- Temp Probe Cable Length: 1 Meter
- Power Supply: DC12V
- Load Power: 120W
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: -50~110°C
- Temperature control range: -50~110°C
- Control precision: up to 0.1°C
- Up key: Press once to display the start temperature. Long press to set start temperature.
- Down key: Press once to display the stop temperature. Long press to set stop temperature.
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Dimensions 60 x 45 x 31 (mm)
- Weight: 55gm

Reviews
There are no reviews yet.