I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-8%
LM1875 20W Audio Power Amplifier IC
Original price was: ₹190.00.₹175.00Current price is: ₹175.00. inc. GST
LM7808 8V Positive Voltage Regulator IC
Original price was: ₹13.00.₹8.00Current price is: ₹8.00. inc. GST
LM124J Quad Operational Amplifier IC
Original price was: ₹190.00.₹175.00Current price is: ₹175.00. inc. GST
- Internally Frequency Compensated for Unity Gain
- Large DC Voltage Gain 100 dB
- Â Wide Bandwidth (Unity Gain) 1 MHz (Temperature Compensated)
- Wide Power Supply Range: – Single Supply 3 V to 32 V – or Dual Supplies ±1.5 V to ±16 V
- Very Low Supply Current Drain (700 μA) —Essentially Independent of Supply Voltage
- Low Input Biasing Current 45 nA (Temperature Compensated)
- Low Input Offset Voltage 2 mV and Offset Current: 5 nA
- Input Common-Mode Voltage Range Includes Ground
- Differential Input Voltage Range Equal to the Power Supply Voltage
- Large Output Voltage Swing 0 V to V + − 1.5 V
- Low Power Quad Operational Amplifier
- Input Offset Voltage (max):Â 5mV
- Input Offset Current (max):Â 30nA
- Input Bias Current (max):Â 150nA
- Operating temperature (max): 1250C
- Output Current (max):Â 2mA
- CMRR (min):Â 70dB
Description
The LM124-N series series designed with four independent, high gain, internally compensated amplifiers. These op-amp designed explicitly to operate from a single power supply voltage over a wide range of voltages. And also the operation via split supply is possible. Meanwhile, these amplifiers make use of a current mirror to achieve the non-inverting input function. This LM124-N seriesoffers low supply current drain that is essentially independent of the magnitude of the supply voltage. As a result, these devices provide wide bandwidth and large output voltage swing. The LM124-N series designed specifically for operation in the temperature range from –40°C to 85°C.
LM124-N are operational amplifiers that operate with only a single power supply voltage, provides true-differential inputs, and remain in the linear mode with an input common-mode voltage of 0 VDC. These amplifiers operate over a wide range of power supply voltage with little change in performance characteristics. Also 25°C amplifier operation is possible down to a minimum supply voltage of 2.3 VDC.
The LM124-N series amplifier offers a large DC voltage gain of 100 dB. Thus makes it ideal in a wide range of applications including transducer amplifiers, dc gain blocks. And all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, the series can be directly operated off of the standard 5-V power supply voltage which is used in digital systems. And will easily provide the required interface electronics without requiring the additional ±15V power supplies.
APPLICATIONS:
- Transducer Amplifiers
- DC Gain Blocks
- Â Conventional Op Amp Circuits
Reviews (0)
Shipping & Delivery
Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.
Reviews
There are no reviews yet.