I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-33%
PIC16F688 Microcontroller IC
Original price was: ₹199.00.₹175.00Current price is: ₹175.00. inc. GST
LM3914 Dot or Bar Display Driver IC
₹85.00 inc. GST
LM324N Quad Operational Amplifier IC
Original price was: ₹30.00.₹20.00Current price is: ₹20.00. inc. GST
MOQ: 2 nos
- Low Power Quad Operational Amplifier
- Input Offset Voltage (max):Â 7mV
- Input Offset Current (max):Â 50nA
- Input Bias Current (max):Â 250nA
- Operating temperature (max): 700C
- Output Current (max):Â 2mA
- CMRR (min):Â 65dB
- Eliminates Need for Dual Supplies
- Four Internally Compensated Op Amps in a Single Package
- Allows Direct Sensing Near GND and VOUT also Goes to GND
- Compatible With All Forms of Logic
- Power Drain Suitable for Battery Operation​
- In the Linear Mode the Input Common-Mode, Voltage Range Includes Ground and the Output Voltage
- Can Swing to Ground, Even Though Operated from Only a Single Power Supply Voltage
- Unity Gain Cross Frequency is Temperature Compensated
- Input Bias Current is Also Temperature Compensated
Description
The LM124-N series is designed with four independent, high gain, internally compensated amplifiers. This op-amp is specifically designed to function over a broad variety of voltages from a single power supply source. It is also feasible to operate with a divided supply. Meanwhile, to achieve the non-inverting input function, these amplifiers require a current mirror. The low supply current drain of the LM124-N series is virtually independent of the amount of the supply voltage. As a result, these devices have a huge output voltage swing and a wide bandwidth. The LM124-N series has been intended to operate in the temperature range of –40°C to 85°C.
The LM124-N is an operational amplifier that uses just one power supply voltage, has true-differential inputs, and operates in the linear model with a common-mode input voltage of 0 VDC. With little change in performance characteristics, these amplifiers can run over a wide variety of power supply voltages. Additionally, the amplifier may operate at 25°C with a minimum supply voltage of 2.3 VDC.
The 100-dB DC voltage gain of the LM124-N series amplifier is impressive. This makes it suitable for a variety of applications, such as transducer amplifiers and dc gain blocks. All standard op-amp circuits may now be implemented more readily in single-power supply systems. The series, for example, may be powered directly from the typical 5-V power supply voltage used in digital systems. Also, the interface electronics will be simply provided without the need for extra 15V power sources.
​APPLICATIONS:
- Transducer Amplifiers
- Â DC Gain Blocks
- Â Conventional Op-Amp Circuits
Reviews (0)
Shipping & Delivery
Related products
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.