I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
LM338K 5-Amp Adjustable Regulator IC
₹155.00 Original price was: ₹155.00.₹115.00Current price is: ₹115.00. inc. GST
- 5-Amp Adjustable Regulator
- 7A Peak Output Current
- 5A Output Current
- Specified Thermal Regulation
- Current Limit Constant with Temperature
- Input-Output Voltage Differential 35 V
- Operating Junction Temperature Range 0 to 1250C
- Package T0-3 STEEL
LM338K 5A Adjustable Voltage Regulator designed as the LM138 series of adjustable 3-terminal positive voltage regulators. It is capable of supplying a current more than 5A over a 1.2V to 32V output range. These are quite easy to use and needs only 2 external resistors to line the output voltage. Moreover, both line and load regulation are similar to discrete designs.LM338K 5A Adjustable transformer IC manufactured in standard 3-lead transistor packages which are easily mounted and handled.
The most important and unique feature of the LM338 family is time-dependent current limiting. These current limit circuitry allows peak currents of up to 12 A drawn from the regulator for short periods of time. Thereby allows the LM138Â widely used in applications with heavy transient loads. And also speeds start-up under full-load conditions. Under sustained loading conditions, the current limit reduces to a safe value protecting the regulator.
In addition to higher performance than fixed regulators, the LM338K offers full overload protection available only in IC’s. Moreover, the IC chip designed with onboard current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal accidentally disconnected. Basically, there exist no requirement of any capacitor unless the device situated more than 6 inches from the input filter capacitors in which case an input bypass needed. An output capacitor are often added to enhance transient response, while bypassing the adjustment (LM350A) pin will increase the regulator’s ripple rejection.
​​APPLICATIONS:
- Adjustable Power supplies
- Constant Current Regulators
- Battery Chargers

Related products
4 Pin RMC Connector
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
GSM Antenna
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
SIM Card Holder
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.