I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Magnetic Contactor TC1-D25 10
Magnetic Contactor TC1-D25 10 — 25A, 3P+1NO contactor designed for reliable motor and power control. Supports AC 380/415V, 50/60Hz with durable build, low power consumption, and easy DIN rail mounting.
Description
Magnetic Contactor TC1-D25 10
The TC1-D25 10 Magnetic Contactor is a high-performance switching device designed for controlling electric motors, lighting, heating, and other electrical loads. Built with durable materials and advanced electromagnetic technology, this contactor ensures reliable performance and long service life in industrial and commercial applications.
Key Features:
-
Model: TC1-D25 10
-
Rated Current: 25A
-
Rated Voltage: AC 380V / 415V
-
Control Voltage: 220V AC (Coil voltage may vary by model)
-
Contact Configuration: 3P + 1NO (Three main contacts and one normally open auxiliary contact)
-
Frequency: 50/60Hz
-
Insulation Voltage: 690V
-
Durability: High mechanical and electrical endurance
-
Mounting Type: DIN rail or screw mounting
-
Applications: Motor control, power distribution, lighting circuits, and automation systems
Product Highlights:
-
Compact and lightweight design for easy installation
-
Low power consumption and quiet operation
-
Strong arc-suppression capability for enhanced safety
-
Compatible with overload relays for complete motor protection
Reviews (0)
Shipping & Delivery
Related products
Arduino CNC Shield
- Shield type: Arduino Nano
- Firmware: GRBL
- Modular stepper motor drivers: 3
- Limit switches: 6
- Micro-stepping: 1/16
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.51
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Text to Speech TTL Module (Serial to Speech)
- Single row 0.1″ header for easy connection to a host system
- Power requirements: +5 VDC
- 30 mA idle
- 46-220 mA active (depending on speech parameters and output load)
- Communication: Asynchronous 9600 bps serial (8N1)
- Dimensions: 1.25″x1.5″x0.37″
-
Text support rate is better
-
Interface operation is simpler
-
5V single power supply.
-
Output directly connected to the speaker, can drive 4 ohms 3W / 8 ohm 2W speakers
-
Busy status output, can be connected to the microcontroller IO or indicator light, no need to be left floating.
-
Voice effect optimization
-
Module miniaturization and easy integration
-
Dimension: 33*27.5mm
-
With mounting holes
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Reviews
There are no reviews yet.