I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display – Red
₹200.00 Original price was: ₹200.00.₹175.00Current price is: ₹175.00. inc. GST
- Measurement range: 4.7V to 30V DC
- Only 2 wires, derives supply from the source
- Operation current: < 30mA
- Display colour: RED
- Measurement Error tolerance: +/- 2 percent
- Distance between mounting holes: 26mm
- Current Consumption: < 15 mA.
- Accuracy: 0.1 V.
- Wire length: 18cm.
- Refresh Speed : Approx. 200mS/time.
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 30mm x 12mm x 8.5mm
This Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display is designed explicitly for Vehicles Motor. This DC voltmeter is defined as one of the prominent devices used by an electronics technician. It is a perfect tool for most applications and consumes less than 30mA from the target voltage source to power itself. The 2 wires on the panel meter display module hook up to the target voltage point. And measure the voltage reading on the 3 digits seven segment display.
This is highly accurate and compact-sized digital voltmeter comes with an LED Display. In this module, the voltmeter uses 0.36-inch digital tube display, with a super small volume. To achieve the best measurement precision, voltage is measured according to the different automatic moving positions of the decimal point. During the connection, the red wire is to connect to the positive pole, and the black wire is to connect to the negative pole. As the module features reverse polarity protection, there is no need to worry if there exists any mismatch while connecting.
This voltmeter doesn’t need external drive working power, it can work with measuring voltage, the working voltage’s range is 4.5-30V. In order to obtain high measurement accuracy, the position of decimal points moved automatically according to the different measuring voltages. When the measured voltage is below 10V, it displays two places after the decimal point. Whereas when it measures above 10V, it will display one place after the decimal point.
This voltmeter is widely used to measure the storage battery’s voltage in motorcycles and cars and also can grasp the storage battery’s status. It also can be used to measure other voltages. As the 30V is the maximum operating limited voltage of voltmeter’s, during operating please leave enough margin. This avoids the voltmeter’s permanent damage due to an electrical spark, power supply ripple, or other too high abrupt change of voltage.

Related products
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
7 mm 6 LED Endoscope Waterproof Inspection Borescope Camera 5M USB Cable
- Lens Diameter: 7.0MM
- Pixel: 0.3 megapixels
- Resolution: 640*480
- sensor size: 1/9 inch
- Frame Rate: 30fps
- View Angle: 67 degree
- Focal Distance: 3cm-10cm-
- LED Lights: 6pcs
- Interface: USB2.0
- Photo format: jpeg
- Video Format: AVI
- Waterproof level: IP67
- Support Computer: Windows XP/7/8/10/Mac
- Cable Length: 5M
- operating temperature: 0 degrees to 70 degree
- Dimension: Approx. 13.5*13.5*3cm
- Weight: 52g
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
Hex 12, 16, 19Mm Countersink Power Drill Bit Bore Set for Wood Metal (1/4-inch) – Set of 3
MA-3485 Pocket 60x LED Currency Detecting Microscope
- Light Source Type: LED
- Colour: Silver
- Material: ABS + Acrylic
- Lens Material: Glass
- Power Supply: 3* CR1620 Button
- Lens diameter: 10mm
- Magnification strength: 60x
- 2 x LED lights, 1 x UV light
- Comes with a faux leather pouch to protect from scratches and other damage
- Used for inspecting tiny objects and inspecting hallmarks.
- It is ideal for the watchmaking industry, Jewellery industry, coins, stamps, and the antique industry
- Dimensions: 37mm * 41mm * 18mm
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press
- High precision screw thread and tapered hole.
- Strong impact resistance.
- Compatible with impact drill and different power electric drill.
- jt0 taper the biggest end of diameter: 6. 350mm
- jt0 taper the smallest end of diameter: 5. 800mm
- Outer diameter: 21. 5mm
- Drill Clip aperture: 6mm
- Taper type outside diameter drill chuck: 21mm
- Clamping range: 0. 3mm-4mm drill,
- Maximum clamping: 4.2mm
- Fit motor shaft diameter 3. 17mm
- Connection size: jt0 (inner hole diameter is 6 mm) for milling machine, lathe, drilling machine, woodworking machine
Square MAX7219 8×8 LED Dot Matrix Display Module
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 mm
- PCD Dimensions: 50×32 mm
- A single module can drive an 8 * 8 common cathode lattice
- Requires only 3 communication wires of MCU
- Cascading multiple Matrix LED Module is very easy
- The size of the display is very compact
- The PCB features M3 holes for mounting.
Titanium HSS 9-Step Cone Drill 4-12MM Hex Shank 1/4 Hole Cutter Drilling Tool
- Shank: 1/4 Hex Shank
- Comes in 4-12MM ( 4,5,6,7,8,9,10,11,12MM )sizes
- Material: HSS
- The ladder of its unique structure, a bit can open a variety of specifications of aperture.
- No need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- The usage of tools: drill, bench drill. Work while water cooling can effectively extend the service life of drill bit
- Do not need to use center punch, compared with the ordinary twist drill is not easy to be broken.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible.
- Size: Approx. 72mm
- Weight: 21g

Reviews
There are no reviews yet.