I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-5%
BMP 180 Digital Barometric Pressure Sensor
Original price was: ₹400.00.₹275.00Current price is: ₹275.00. inc. GST
Generic GY-85 BMP085 Sensor Module 9 Axis 6DOF 9DOF IMU Sensor
Original price was: ₹955.00.₹900.00Current price is: ₹900.00. inc. GST
MMA7455 (MMA7361 MMA7260) Triple Axis Accelerometer Sensor Module
Original price was: ₹735.00.₹699.00Current price is: ₹699.00. inc. GST
- Low Current Consumption: 400 µA.
- Sleep Mode: 3 µA.
- Low Voltage Operation: 2.2 V – 3.6V.
- Fast Turn-On Time (0.5 ms Enable Response Time).
- Analogue output for each axis.
- +5V operation @1ma current
- Dormancy can make by single-chip IO control;
- Simple to use
- Analogue output for each axis.
- Selectable Sensitivity (+- 1.5g, +- 6g)
- Robust design, high shock survivability
- Low Cost
Description
This is a breakout board designed explicitly for Freescale’s MMA7361. MMA7361 is a sensor based on three-axis analogue Micro Electrical Mechanical System (MEMS) technology. This sensor operates at a very low amount of power and has a g-select input. It switches the accelerometer in a range between â±1. 5g and â±6g measurement ranges.
MMA7361 is defined as an Angle Acceleration Sensor Module that replaces the MMA7260 Acceleration Module. A Tilt Angle Inclination Module can be used Instead of MMA7260. This 3 axis accelerometer measures dynamic acceleration (motion, shock, or vibration). MMA7361 was designed with extremely low noise and power consumption of only 400 µA. used to sense motion or tilt (in case of non-moving) in 3 axes. The sensor typically operates between 2. 2 and 3. 6vdc (3. 3v optimal). And all three axes have their own analogue output.
The onboard MMA7361 (replace MMA7260) module is a low-cost Mini capacitive acceleration sensor supporting 5V/3.3V voltage input. The module comes with an onboard RT9161, Lower pressure drop than 1117, faster load speed. This makes it perfect for a high noise power supply environment.
The range selected by microcontroller IO can also be resistance selection. Moreover, the common pins are lead out, pins standard 100mil (2.54mm), convenient for the matrix board. Sleep Mode controlled by microcontroller IO.
APPLICATIONS:
- Laptop PC: Freefall Detection, Anti-Theft.
- 3D Gaming: Tilt and Motion Sensing, Event Recorder.
- Robotics: Motion Sensing.
- Cell Phone: Image Stability, Text Scroll, Motion Dialing, E-Compass.
- Navigation and Dead Reckoning: E-Compass Tilt Compensation.
- Pedometer: Motion Sensing / PDA: Text Scroll.
- HDD MP3 Player: Freefall Detection.
Reviews (0)
Shipping & Delivery
Related products
1 CHANNEL 12V RELAY
- 1-Channel relay interface board
- Operating voltage: 12V DC
- Provide high current relay of 15A
- For quick and easy connection high-quality screw terminals provided
- Can control both AC & DC appliances
- LED status indicates relay ON/OFF state.
- High current relay of 10A @250 V AC/10A@ 30V DC
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Dimension: 43*17*17mm
- Weight: 150gm
16 CHANNEL 12V RELAY
- 16 channel 12V relay board
- Operating voltage: 12V
- Supply current: 0.2 A
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- Optocoupler protection
- LED status indicates relay ON/OFF state.
- The 10-16 road can be any full-on/off or any road
- Common terminal(com) in each rely is user friendly and can be accessed by different signal
- Normally closed or normally open with each port
- Strong anti-jamming ability and stable performance
- The on-board power supply module doesn’t need any external power
- Dimension: 180*90*20mm
- Weight: 100gm
2 CHANNEL 5V RELAY
- High current relay
- Two LED S to indicate relays ON/OFF status
- Low-level trigger expansion board
- Opto isolation circuitry
- Works with logic level signal 3.3V or 5V devices
- Can be used as normally open (NO) or normally closed (NC)
- Back EMF protection
- Ensures diode current protection
- AC control voltage: 250v @mx10A
- DC control voltage: 30V @max 10A
- Easy installation and fixing
4 CHANNEL 5V RELAY
- 4-Channel relay interface board
- Operating voltage range: 3.3V to5V
- Maximum current: 10A
- Supply current: 20 mA
- High current relay of 10A @250 V AC/10A@ 30V DC
- Control signal: TTL level
- For quick and easy connection high-quality screw terminals provided
- Pull-down circuit to avoid malfunction
- Power supply indicator
- Can control both AC & DC appliances such as DC motors, solenoid valves, lamps, etc.
- LED status indicates relay ON/OFF state.
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Operating temperature: -40 to 85 degrees Celsius
- Dimension: 76*56*17mm
- Weight: 7gm
BMP085 9-Axis IMU Magnetic Acceleration Gyroscope Atmospheric Pressure Module
- Nine-axis module (three-axis gyroscope + three-axis acceleration + 3-axis magnetic field + pressure)
- Use chips: L3G4200D + ADXL345 + HMC5883L + BMP085
- Communication: IIC communication protocol (fully compatible with the 3-5v system)
- Mounting hole 3mm
- The power supply: 3-5 v (internal low voltage difference voltage stabilizing)
- Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output
- The gyroscope range: + 250 500 1000 2000 °/s
- Acceleration range: ± 2 ± 4 ± 8 ± 16 g
- Standard 2.54mm pin interface, easy breadboard perforated plate experimental connection
- Adopt gold PCB process
- Module size: 25.8mm * 16.8mm
MMA845 Digital Triaxial Accelerometer Precision Tilt 3-Axis Module
- Power Supply: 3v-5V.
- Pitch: 15mm.
- Mounting hole diameter: 3mm.
- IIC digital output.
- Up to two interruption functions.
- ±2 g/±4 g/±8 g dynamically selectable full scale
- Three motion detection channels.
- Freefall down or motion detection.
- Automatic ODR change for auto-wake and return to sleep
- Pulse detection.
- Vibration detection.
- Dimension: 1.45cm x 2.05 cm (L x W).
MPU6050 6AXIS (GYROSCOPE + ACCELEROMETER) SENSOR
- MEMS 3-axis accelerometer and 3-axis gyroscope values combined
- Power Supply: 3-5V
- Communication: I2C protocol
- Built-in 16-bit ADC provides high accuracy
- Sensing range: +/-2G to +/-16G
- Built-in DMP provides high computational power
- Can be used to interface with other IIC devices like a magnetometer
- Configurable IIC Address
- In-built temperature sensor
- Ideal for noisy power environment
- Operating temperature: -40 degrees to 85 degrees Celsius
- Dimension: 28*14mm
Reviews
There are no reviews yet.