I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NXC Series AC Contactor (6A – 630A) – 3P
NXC Series AC Contactor (6A – 630A) – 3P
The CHINT NXC Series is a reliable 3-pole AC contactor designed for motor control, power switching, and industrial automation.
Key Features
-
Current Range: 6A to 630A
-
Poles: 3P (3 normally open contacts)
-
Voltage: 220V – 690V (operational), up to 1000V insulation
-
Coil Options: AC / DC / AC-DC (model dependent)
-
Mounting: DIN rail (small models) / Screw mounting (large models)
-
Standards: IEC 60947-1, IEC 60947-4-1
-
Aux Contacts: Optional NO/NC combinations
-
Applications: Motor starters, pumps, HVAC, machinery control
Key Specifications & Features of NXC Series
-
Rated Operational Current (Ie):
-
From 6 A up to 630 A. chintglobal.com+2electronicverse.in+2
-
-
Rated Operational Voltage (Ue):
-
Between 220 V and 690 V. chintglobal.com+2chintglobal.com+2
-
-
Insulation Voltage (Ui):
-
For smaller models (NXC-06M … NXC-100): 690 V
-
For larger models (NXC-120 … NXC-630): 1000 V electronicverse.in+1
-
-
Number of Poles:
-
Primarily 3P (3 poles) for most models. shop.sirichaielectric.com+1
-
There are also 4-pole variants, but only in some smaller sizes (e.g., “only for NXC-06M … 12M” according to the catalog). chintglobal.com+1
-
-
Coil Control Methods / Coil Types:
-
AC coil: for models NXC-06(M) up to ~225 A. electronicverse.in
-
DC coil: for mini-types (e.g., NXC-06M … 12M) chintglobal.com+1
-
AC/DC coil: for larger ones (NXC-265 … 630) electronicverse.in
-
-
Installation / Mounting:
-
Smaller units (up to NXC-100): can be installed on DIN rail and screwed. chintglobal.com
-
Larger units (NXC-120 to 630): screw mounting only. electronicverse.in
-
-
Standards / Certifications:
-
Complies with IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1. chintglobal.com
-
-
Poles / Contacts:
-
Main contacts: 3 NO (normally open) for 3-pole models. shop.sirichaielectric.com
-
Auxiliary contacts: options like 1 NO + 1 NC, 2 NO + 2 NC depending on the model. BaoAnJSC+1
-
-
Environmental Conditions:
-
Operating / ambient temperature: –35 °C to +70 °C. chintglobal.com
-
Installation altitude: up to 2000 m above sea level. chintglobal.com
-
Pollution Degree: 3 (relatively high pollution environments) as per spec sheet. shop.sirichaielectric.com
-
-
Durability / Mechanical Life:
-
(From datasheet) Electrical and mechanical life are specified in catalog — refer to catalog for cycle counts. chintglobal.com
-
-
Matching Overload Relays:
-
Recommended / compatible thermal overload relay: NXR series (for making a DOL starter) according to Chint’s documentation. Amax Electric+1
-

Related products
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
CS DC Geared Motor 10 RPM
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
Potentiometer Sensor Module
Superbit expansion board for BBC Micro Bit Pocket Sized – Single Board Computer
ULink2 ARM Emulator Programmer firmware Support MDK5.0 Cortex-M4 SWD
WH0201102 ABS 1.75 mm 1 kg Filament-Wanhao
- Material: ABS
- Color: White
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified

Reviews
There are no reviews yet.