I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NXC Series AC Contactor (6A – 630A) – 3P
NXC Series AC Contactor (6A – 630A) – 3P
The CHINT NXC Series is a reliable 3-pole AC contactor designed for motor control, power switching, and industrial automation.
Key Features
-
Current Range: 6A to 630A
-
Poles: 3P (3 normally open contacts)
-
Voltage: 220V – 690V (operational), up to 1000V insulation
-
Coil Options: AC / DC / AC-DC (model dependent)
-
Mounting: DIN rail (small models) / Screw mounting (large models)
-
Standards: IEC 60947-1, IEC 60947-4-1
-
Aux Contacts: Optional NO/NC combinations
-
Applications: Motor starters, pumps, HVAC, machinery control
Key Specifications & Features of NXC Series
-
Rated Operational Current (Ie):
-
From 6 A up to 630 A. chintglobal.com+2electronicverse.in+2
-
-
Rated Operational Voltage (Ue):
-
Between 220 V and 690 V. chintglobal.com+2chintglobal.com+2
-
-
Insulation Voltage (Ui):
-
For smaller models (NXC-06M … NXC-100): 690 V
-
For larger models (NXC-120 … NXC-630): 1000 V electronicverse.in+1
-
-
Number of Poles:
-
Primarily 3P (3 poles) for most models. shop.sirichaielectric.com+1
-
There are also 4-pole variants, but only in some smaller sizes (e.g., “only for NXC-06M … 12M” according to the catalog). chintglobal.com+1
-
-
Coil Control Methods / Coil Types:
-
AC coil: for models NXC-06(M) up to ~225 A. electronicverse.in
-
DC coil: for mini-types (e.g., NXC-06M … 12M) chintglobal.com+1
-
AC/DC coil: for larger ones (NXC-265 … 630) electronicverse.in
-
-
Installation / Mounting:
-
Smaller units (up to NXC-100): can be installed on DIN rail and screwed. chintglobal.com
-
Larger units (NXC-120 to 630): screw mounting only. electronicverse.in
-
-
Standards / Certifications:
-
Complies with IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1. chintglobal.com
-
-
Poles / Contacts:
-
Main contacts: 3 NO (normally open) for 3-pole models. shop.sirichaielectric.com
-
Auxiliary contacts: options like 1 NO + 1 NC, 2 NO + 2 NC depending on the model. BaoAnJSC+1
-
-
Environmental Conditions:
-
Operating / ambient temperature: –35 °C to +70 °C. chintglobal.com
-
Installation altitude: up to 2000 m above sea level. chintglobal.com
-
Pollution Degree: 3 (relatively high pollution environments) as per spec sheet. shop.sirichaielectric.com
-
-
Durability / Mechanical Life:
-
(From datasheet) Electrical and mechanical life are specified in catalog — refer to catalog for cycle counts. chintglobal.com
-
-
Matching Overload Relays:
-
Recommended / compatible thermal overload relay: NXR series (for making a DOL starter) according to Chint’s documentation. Amax Electric+1
-

Related products
2K2pf 2KV High Voltage Disc Capacitor (10 pcs)
Arduino LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Creality CR-5 Pro 3D PRINTER/300*325*380mm/multiple materials supported
HC-06 4Pin Bluetooth Module Without Reset Switch
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Dormancy current: no dormancy.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
- Profiles: Bluetooth serial port.
Peacock Blue PLA 1.75 mm 1 KG Filament-Wanhao
Peak Green PLA 1.75mm 1 KG Filament-Wanhao
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.

Reviews
There are no reviews yet.