I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-31%
PIC16F72 Microcontroller IC
Original price was: ₹250.00.₹200.00Current price is: ₹200.00. inc. GST
PIC16F877A Microcontroller IC
Original price was: ₹450.00.₹400.00Current price is: ₹400.00. inc. GST
PIC16F876A Microcontroller IC
Original price was: ₹650.00.₹450.00Current price is: ₹450.00. inc. GST
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 14 kB
- RAM: 368 byte
- Internal Oscillator: No
- ADC: 1 (5 channels)
- of Pins: 28
- Voltage: 2V – 5.5V
- 100,000 erase/write cycle Enhanced Flash program memory typical
- 1,000,000 erase/write cycle Data EEPROM memory typical
- Data EEPROM Retention > 40 years
- Self-reprogrammable under software control
- In-Circuit Serial Programming™ (ICSP™) via two pins
- Single-supply 5V In-Circuit Serial Programming
- Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable code protection
- Power saving Sleep mode
- Selectable oscillator options
- In-Circuit Debug (ICD) via two pins
- CMOS TECHNOLOGY:
- Low-power, high-speed Flash/EEPROM technology
- Fully static design
- Wide operating voltage range (2.0V to 5.5V)
- Commercial and Industrial temperature ranges
- Low-power consumption
Description
PIC16F876A Microcontroller IC manufactured in 28-pin packages, while PIC16F876 devices are available in 40-pin and 44-pin packages. This PIC microcontroller is meant to be a powerful microcontroller (200 nanosecond instruction execution). CMOS FLASH-based 8-bit microcontroller packs that are straightforward to programmed (just 35 single word instructions). It is based on Microchip’s strong PIC architecture and is upwardly compatible with the PIC16C5X, PIC12CXXX, and PIC16C7X devices in a 28-pin package.
The PIC16F876A has 128 bytes of EEPROM data memory, self-programming, an ICD, two comparators, and five 10-bit A/D converter channels. Furthermore, the synchronous serial port can be set up as either a 3-wire Serial Peripheral Interface (SPI) or a 2-wire Inter-Integrated Circuit (I2C) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these characteristics make it an ideal device for higher-level A/D applications. It has a broad range of uses in the automotive, industrial, appliance, and consumer markets. Furthermore, the PIC16F87XA microcontroller family shares a similar architecture with the following exceptions:
- The PIC16F873A and PIC16F874A share half of the PIC16F876A and PIC16F877A’s total on-chip memory.
- Three I/O ports are available on the 28-pin devices, whereas five are available on the 40/44-pin devices.
- These 28-pin devices have fourteen interrupts, while the 40/44-pin devices have fifteen
- Five A/D input channels are available on the 28-pin devices, whereas eight are available on the 40/44-pin devices.
- The Parallel Slave Port is only available on 40/44-pin devices.
Reviews (0)
Shipping & Delivery
Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.