I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-8%
4 Inch 0.14A 230V AC Fan
Original price was: ₹350.00.₹300.00Current price is: ₹300.00. inc. GST
3 Inch 0.16A 12V DC Fan
Original price was: ₹80.00.₹70.00Current price is: ₹70.00. inc. GST
PIC18F2550 Microcontroller IC
Original price was: ₹600.00.₹550.00Current price is: ₹550.00. inc. GST
- Maximum CPU Frequency: 48 MHz
- Architecture: 8 bit
- Program Memory (Flash): 32 kB
- RAM: 2048 byte
- Internal Oscillator: 8 MHz, 32 KHz
- ADC: 1 (10 channels)
- of Pins: 28
- Voltage: 2V – 5.5V
- C Compiler Optimized Architecture with optional Extended Instruction Set
- 100,000 Erase/Write Cycle Enhanced Flash Program Memory typical
- 1,000,000 Erase/Write Cycle Data EEPROM Memory typical
- Flash/Data EEPROM Retention: > 40 years
- Self-Programmable under Software Control
- Priority Levels for Interrupts
- 8 x 8 Single-Cycle Hardware Multiplier
- Extended Watchdog Timer (WDT): – Programmable period from 41 ms to 131s
- Programmable Code Protection
- Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins
- In-Circuit Debug (ICD) via two pins
- Optional dedicated ICD/ICSP port (44-pin devices only)
- Wide Operating Voltage Range (2.0V to 5.5V)
Description
PIC18F2550 Microcontroller IC family of devices offers the advantages of all PIC18 microcontrollers. It provides high computational performance at an economical price, with an added feature of high endurance, Enhanced Flash program memory. And also this PIC18F 2550 introduces design enhancements enable these microcontrollers a logical choice for many high-performance, power-sensitive applications.
PIC18F2550 is a microcontroller IC with a full-featured USB communications module that complies with USB Specification Revision 2.0. As a result, for all supported data transmission types, the module functions flawlessly with both low-speed and full-speed connectivity. Furthermore, this PIC IC has an on-chip transceiver and a 3.3V regulator. Also, external transceivers and voltage regulators are supported. Both programmed memory and data EEPROM were provided by the Enhanced Flash cells. They can withstand tens of thousands of erase/write cycles – up to 100,000 for programmed memory and one million for EEPROM. Furthermore, data retention without refresh is estimated to be larger than 40 years. Furthermore, because of its self-programmability, these devices may write their own programme memory areas using internal software control
The PIC18F2550 has an optional expansion to the PIC18 instruction set that adds eight additional instructions and an Indexed Literal Offset Addressing mode to the PIC18 instruction set. This extension, which may be selected as a device configuration option, was created to optimise re-entrant application code written in high-level languages like C. It also has an Enhanced CCP Module, which provides 1, 2, or 4 modulated outputs in PWM mode for controlling half-bridge and full-bridge drivers. This device also contains an auto-shutdown functionality for silencing PWM outputs in the event of an interrupt or under particular situations, as well as an auto-restart option for reactivating outputs after the condition has passed.
Reviews (0)
Shipping & Delivery
Related products
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.