I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%
LED MAGNIFYING LENS
Original price was: ₹650.00.₹600.00Current price is: ₹600.00. inc. GST
3S BMS Charging Module
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
PIR Sensor Bulb
Original price was: ₹500.00.₹450.00Current price is: ₹450.00. inc. GST
Related products
ESP8266-12E 10A 220V NETWORK RELAY WIFI MODULE INPUT DC 7V-30V
- Input voltage: DC 7V-30V
- Relay voltage: 220V
- Relay current: 10A
- ISM: 2.4GHz
- PA: +25dBm
- Input over-voltage protection
- Input overcurrent protection
- ESP8266 WIFI module with 4 layered board design
- LED indicator for input status and output status
- 220V 10A relay, normally opened, and one normally closed
- Optocoupler isolation input, TVS input protection
- Access server control via HTTP protocol by TCP client mode, high current terminals
- Dimension: 65*40*18mm
GP2Y1010AU0F Optical Dust Sensor
- Operating Voltage: 4.5V to 5.5V
- Low Current Consumption: 20mA max
- Sensitivity: 0.5V/(0.1mg/m3)
- Clean-air voltage: 0.9V typical
- Storage temperature:-20 ~80 degrees Celsius
- Minimum Detectable Dust Size: 0.5µm
- Smallest particles detected value: 0.8 micron
- Dust Density Sensing Range: Up to 580 µg/m3
- Sensing Time: Less than 1 Second
- Service life: 5 years
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
- Lead-free and RoHS directive compliant
- Operating temperature:-10 -65 degrees Celsius
- Dimensions: 46.0 x 30.0 x 17.6 mm
- Weight: 15gm
HLK-SW16 16 CHANNEL WIFI CONTROLLED RELAY BOARD
- Supply voltage: DC 5V
- Current supply: 2 ampere
- Wi-Fi module: HLK-RM04
- 16 channel device
- Antenna: 2.4G flexible antenna
- Low power Wi-Fi module
- Support 802.11b/g/n protocol
- Support AP/STA
- Support TCP server/ TCP client/ UDP server/ UDP client work mode
- Doesn’t need any driver, use as the normal serial port of PC
- Support wireless security WEP/WPA-PSK/ WPA2-PSK/TKIP/AES
- Dimension: 115*130*19mm
MQ4 Sensor
- Power requirements: VCC - 5V±0.1
- DO output: TTL digital 0 and 1 (0.1 and 5V)
- AO output: 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detection Gas: Natural gas/Methane
- Detection Concentration: 200-10000ppm (Natural gas / Methane)
- Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
- Heater consumption: less than 750mw
- Operating temperature: 14 to 122 °F (-10 to 50°C)
- Â Related humidity less than 95%Rh
- Load resistance: 20KΩ
- Sensing Resistance: 10KΩ- 60KΩ (1000ppm CH4)
- Preheat time: Over 24 hour
- Standard Encapsulation Bakelite, Metal cap
MQ5 Module
- Operating voltage: 5V
- Interface Type: Analog & Digital
- Dual signal output (analogue output, and TTL level output)
- Detecting concentration：200-10000ppm
- The TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller
- High Sensitivity to LPG, Natural Gas, Town Gas
- small sensitivity to smoke & alcohol
- Low Cost.
- Stable & Long Life.
- Simple drive circuit.
- Fast response.Â
- Onboard Power indication.
- Adjustable sensitivity
- Dimension: 32mm x 22m x 27mm
SWIVEL INFRARED MOTION SENSOR OCCUPANCY SWITCH
- Power frequency: 50~60Hz
- Control light: <3 LUX ~ 2000 Lux (Adjustable)
- Time-Delay: Minimum:8sec±3sec to a Maximum:7min±2min
- Power source: 100V/AC-130V/AC <=> 220V/AC-240V/AC
- 1200W(220V/AC-240V/AC) - 800W(100V/AC-130V/AC)
- Power consumption:0.45W(static 0.1W)
- Detection range: 180°
- Detection distance: 12 meters maximum at less than 24°C
- Working temperature:-20 to 40°C
- Working humidity: Less than 93% Relative Humidity
- Suggested Installation height: 0.5 meter to 3.5 meters
- Detection motion speed: 0.6 to 1.5 meters per second
- Identify day and night automatically -
- Power and detection indication
- Time-delay added continually
- Time-delay adjustment according to the customer desire. The minimum time is 8sec±3sec and the maximum is 7min±2min.
- Locking function: the sensor will keep load lighting when power is shut off for 2 seconds and then on. When power is shut off for 4 seconds and then on, sensor will resume automation.
Reviews
There are no reviews yet.