I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
“4 Pin RMC Connector” has been added to your cart. View cart
TL084 General Purpose JFET Quad Operational Amplifier IC
₹36.00 Original price was: ₹36.00.₹24.00Current price is: ₹24.00. inc. GST
PT2258 6-Channel Electronic Volume Controller IC
₹100.00 Original price was: ₹100.00.₹70.00Current price is: ₹70.00. inc. GST
PT2253 Electronic Volume Controller IC
₹95.00 Original price was: ₹95.00.₹80.00Current price is: ₹80.00. inc. GST
-
CMOS Technology
-
Low Power Consumption
-
Operating Voltage Range : Vcc = 6 ~ 12 V (Backup Voltage is up to 4 V)
-
0dB to -68dB attenuation controlled by 2dB/step
-
2 Channels in each chip
-
Capable to control attenuation by a built-in oscillator and Up/Down Pin
-
Single Power Supply or Dual Power Supplies of (+) and (-) can be used
-
Wide Frequency Response Range
-
Very Low Harmonic Distortion
-
Available in 16 pins, DIP Package
Description
The PT2253A is an electronic volume controller IC that uses CMOS technology and is specifically built for audio equipment. It has two built-in channels, making it excellent for both mono and stereo sound applications. To name a few features, the PT2253A has a wide frequency response range and very low harmonic distortion, ensuring a highly effective and stable performance. Data is sent to and from the CPU to the PT2253 through the SDA and SCL of this IC. The BUS Interface’s SDA and SCL functions. The pull-up resistors should be linked to the positive supply voltage as much as possible. The pin assignments and application circuit for this volume controller IC have been improved for ease of PCB layout and cost savings.
To increase and reduce loudness, all audio amplifiers require a mechanism. Mechanical pieces, such as a potentiometer, are used in the majority of such devices. Furthermore, this electrical Volume Controller IC is commonly utilised to produce a digitally controlled audio controller. This is a very basic gadget IC that is used to regulate the audio output from an amplifier electronically.
APPLICATIONS
- Audio Equipment Volume Control
- Traditional VR Replacement
Reviews (0)
Be the first to review “PT2253 Electronic Volume Controller IC” Cancel reply
Shipping & Delivery

Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.