I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Sold out
DRV8825 Stepper Motor
Original price was: ₹300.00.₹275.00Current price is: ₹275.00. inc. GST
SanDisk Cruzer Blade SDCZ50-008G-I35 8GB USB 2.0 Pen Drive
₹500.00 inc. GST
Reos Lite E2713W LED Smart Bulb (1100Lumens)
- Bulb Base: E27, Color Temperature: 6500K, Lumens: 1100lm
- Wattage: 13 watts, Operating Voltage: 115-260 volts
- Included Components: LED Bulb
- Adjustable colour temperature (2700K to 6500K), 15000 hours life, bluetooth 4.0
- Energy efficient
- Instant alerts (weather, SMS, whatapp, facebook, tinder etc.)
- Schedule on/offs
- Reading, party and movie modes
Description
| Brand | Reos |
|---|---|
| Manufacturer | Cube26 |
| Part Number | REOS_13W_LED_ADJUS |
| Height | 11 Centimeters |
| Length | 8 Centimeters |
| Width | 8 Centimeters |
| Weight | 225 Grams |
| Colour | White |
| Material | Plastic |
| Number of Lights | 1 |
| Included Components | LED Bulb |
| Voltage | 230 Volts |
| Batteries Included | No |
| Batteries Required | No |
| Type of Bulb | LED |
| Cap Type | E27 |
| Luminous Flux | 1100 Lumen |
| Wattage | 13 Watts |
| Colour Temperature | 6500 Kelvin |
| Average Life | 20000 Hours |
| Bulb Diameter | 8 centimetres |
| Bulb Length | 11 Centimetres |
| Manufacturer | Cube26 |
Reviews (0)
Shipping & Delivery
Related products
ESP8266-12E 10A 220V NETWORK RELAY WIFI MODULE INPUT DC 7V-30V
- Input voltage: DC 7V-30V
- Relay voltage: 220V
- Relay current: 10A
- ISM: 2.4GHz
- PA: +25dBm
- Input over-voltage protection
- Input overcurrent protection
- ESP8266 WIFI module with 4 layered board design
- LED indicator for input status and output status
- 220V 10A relay, normally opened, and one normally closed
- Optocoupler isolation input, TVS input protection
- Access server control via HTTP protocol by TCP client mode, high current terminals
- Dimension: 65*40*18mm
HLK-SW16 16 CHANNEL WIFI CONTROLLED RELAY BOARD
- Supply voltage: DC 5V
- Current supply: 2 ampere
- Wi-Fi module: HLK-RM04
- 16 channel device
- Antenna: 2.4G flexible antenna
- Low power Wi-Fi module
- Support 802.11b/g/n protocol
- Support AP/STA
- Support TCP server/ TCP client/ UDP server/ UDP client work mode
- Doesn’t need any driver, use as the normal serial port of PC
- Support wireless security WEP/WPA-PSK/ WPA2-PSK/TKIP/AES
- Dimension: 115*130*19mm
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- The counter project uses 7 segment display.
- 4 M2 screws positioning holes for easy installation
Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V
- Operating voltage: 220v
- Load Power: 30w
- Sound Control Sensitivity: 95db- 75db
- Light Control Induction: 6lux
- Delay Time: 30 seconds
- High-quality Energy Saving Auto Switch Controlled by Light and Sound
- Ideal Light Switch for use around bathroom, hallways, staircases and porches
- Easy to install
- Load Type: Control energy-saving lamps under 80W,incandescent under 60W,LED light under 30W
- Installation: Shut off the power, load must not short-circuit
- Light ON automatically when sound is detected in the dark, when in daytime or under strong light, circuit in the off state and the light does not turn on.
- Dimension: 6 X 5 x 2.6Cm
Reviews
There are no reviews yet.