I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-15%
Sky Blue ABS 1.75 mm 1 KG Filament-Wanhao
Original price was: ₹2,000.00.₹1,700.00Current price is: ₹1,700.00. inc. GST
Slate Grey ABS 1.75 mm 1 KG Filament-Wanhao
Original price was: ₹2,000.00.₹1,700.00Current price is: ₹1,700.00. inc. GST
Sky Blue PLA 1.75 mm 1 KG Filament-Wanhao
Original price was: ₹2,000.00.₹1,700.00Current price is: ₹1,700.00. inc. GST
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Description
PLA, also known as Polylactic Acid is the most commonly used material for 3d printing, mainly due to its Low Warping and odorless features. PLA defined as a biodegradable material made from corn starch and the highest consumed Bioplastic in terms of Volume, used in the world. It is quite easy to process while manufacturing compared to traditional plastics. It operates at a printing Temperature of 190 – 220 Degrees C. PLA, designed as a biodegradable material performs much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). PLA highly recommended as the default printing material due to its high strength and minimal warping. It offers a wide range of applications in the field of 3D Printing Filament for Desktop 3D Printers.
PLA are available in a wide range of colors and is glossy and marginally translucent. It features a lower melting point, less shrinkage, and is non-toxic. Thus making it a perfect material for everyday 3d printing which is compatible with almost all printers. Moreover, PLA provides constant diameter, thereby offers great finishing in prints. Variation in filament diameter results in poor surface quality (primarily on vertical sections) because it produces unwarranted and uncontrollable fluctuations in extrusion rates.
Recommended temperatures when used with Wanhao 3D printers:
- First Layer: 210 ° C
- Printing temperature: 200 ° C
- Raft temperature: 190 ° C
- Heating bed temperature: 45-60 ° C
Reviews (0)
Shipping & Delivery
Related products
Creality 3D Ender-3 Pro V-slot Prusa I3 DIY 3D Printer
- Modelling technology: FDM ( Fused Deposition Modelling）
- Printing size: 220 x 220 x 250 mm
- Machine size: 440 x 410 x 465 mm
- Max traveling speed: 180mm / s
- Filament: 1.75 mm PLA, TPU, ABS, Gradient color, carbon fiber, etc.
- Input: AC 100 - 265V, 50 - 60Hz
- Output: DC 24V, 15 A, 360W
- Layer thickness: 0.1 - 0.4 mm
- Nozzle diameter: 0.4 mm
- Precision: ±0.1 mm
- File Format: STL, OBJ, G-Code
- Working mode: online or SD offline
- Max nozzle temperature: 255 Deg.C
- Max hotbed temperature: 110 Deg.C
- Bed Temp.: ≤110℃.
- Slice Software: Cura, Repetier-Host, Simplify3D.
- W: 6.9KG.
- W: 8.9KG.
- Package Size : 595*495*165mm. "
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Reviews
There are no reviews yet.